lkml.org 
[lkml]   [2019]   [Mar]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] mISDN: hfcpci: Test both vendor & device ID for Digium HFC4S
Date
From: Bjorn Helgaas <bhelgaas@google.com>

The device ID alone does not uniquely identify a device. Test both the
vendor and device ID to make sure we don't mistakenly think some other
vendor's 0xB410 device is a Digium HFC4S. Also, instead of the bare hex
ID, use the same constant (PCI_DEVICE_ID_DIGIUM_HFC4S) used in the device
ID table.

No functional change intended.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
---
drivers/isdn/hardware/mISDN/hfcmulti.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/isdn/hardware/mISDN/hfcmulti.c b/drivers/isdn/hardware/mISDN/hfcmulti.c
index 4d85645c87f7..0928fd1f0e0c 100644
--- a/drivers/isdn/hardware/mISDN/hfcmulti.c
+++ b/drivers/isdn/hardware/mISDN/hfcmulti.c
@@ -4365,7 +4365,8 @@ setup_pci(struct hfc_multi *hc, struct pci_dev *pdev,
if (m->clock2)
test_and_set_bit(HFC_CHIP_CLOCK2, &hc->chip);

- if (ent->device == 0xB410) {
+ if (ent->vendor == PCI_VENDOR_ID_DIGIUM &&
+ ent->device == PCI_DEVICE_ID_DIGIUM_HFC4S) {
test_and_set_bit(HFC_CHIP_B410P, &hc->chip);
test_and_set_bit(HFC_CHIP_PCM_MASTER, &hc->chip);
test_and_clear_bit(HFC_CHIP_PCM_SLAVE, &hc->chip);
--
2.21.0.225.g810b269d1ac-goog
\
 
 \ /
  Last update: 2019-03-18 14:52    [W:0.059 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site