lkml.org 
[lkml]   [2019]   [Mar]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH net-next 2/3] net: phy: add amlogic g12a mdio mux support
From
Date
On Sun, 2019-03-17 at 17:14 +0100, Andrew Lunn wrote:
> On Thu, Mar 14, 2019 at 03:01:34PM +0100, Jerome Brunet wrote:
> > Add support for the mdio mux and internal phy glue of the g12a SoC family
> >
> > Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
> > ---
> > drivers/net/phy/Kconfig | 10 +
> > drivers/net/phy/Makefile | 1 +
> > drivers/net/phy/mdio-mux-meson-g12a.c | 371 ++++++++++++++++++++++++++
> > 3 files changed, 382 insertions(+)
> > create mode 100644 drivers/net/phy/mdio-mux-meson-g12a.c
> >
> > diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
> > index 071869db44cf..831aa350b1cb 100644
> > --- a/drivers/net/phy/Kconfig
> > +++ b/drivers/net/phy/Kconfig
> > @@ -74,6 +74,16 @@ config MDIO_BUS_MUX_GPIO
> > several child MDIO busses to a parent bus. Child bus
> > selection is under the control of GPIO lines.
> >
> > +config MDIO_BUS_MUX_MESON_G12A
> > + tristate "Amlogic G12a based MDIO bus multiplexer"
> > + depends on ARCH_MESON || COMPILE_TEST
> > + depends on OF_MDIO && HAS_IOMEM
> > + select MDIO_BUS_MUX
>
> Hi Jerome
>
> Do you need some clock depends?

I don't think we need more. ARCH_MESON already selects the necessary clock
parts. As for the COMPILE_TEST, the clock code should be able to compile even
if the common clock framework is disabled.

>
> > +static int g12a_mdio_switch_fn(int current_child, int desired_child,
> > + void *data)
> > +{
> > + struct device *dev = data;
> > + struct g12a_mdio_mux *priv = dev_get_drvdata(dev);
>
> David won't like that you don't have reverse Christmas tree. You need
> to do the assignment to priv in the body of the code. Or can you pass
> data directly to dev_get_drvdata?
>
> > +static int g12a_mdio_mux_probe(struct platform_device *pdev)
> > +{
> > + struct device *dev = &pdev->dev;
> > + struct resource *res;
> > + struct g12a_mdio_mux *priv;
> > + int ret;
>
> Reverse Christmas tree please.

I'll fix these

>
>
> > +
> > + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> > + if (!priv)
> > + return -ENOMEM;
> > +
> > + platform_set_drvdata(pdev, priv);
> > +
> > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > + priv->regs = devm_ioremap_resource(dev, res);
> > + if (IS_ERR(priv->regs))
> > + return PTR_ERR(priv->regs);
> > +
> > + priv->pclk = devm_clk_get(dev, "pclk");
> > + if (IS_ERR(priv->pclk)) {
> > + ret = PTR_ERR(priv->pclk);
> > + if (ret != -EPROBE_DEFER)
> > + dev_err(dev, "failed to get peripheral clock\n");
> > + return ret;
> > + }
> > +
> > + /* Make sure the device registers are clocked */
> > + ret = clk_prepare_enable(priv->pclk);
> > + if (ret) {
> > + dev_err(dev, "failed to enable peripheral clock");
> > + return ret;
> > + }
> > +
> > + /* Register PLL in CCF */
> > + ret = g12a_ephy_glue_clk_register(dev);
>
> On error, you are not disabling the peripheral clock.

Indeed, good catch. Thx

>
> > + if (ret)
> > + return ret;
> > +
> > + return mdio_mux_init(dev, dev->of_node, g12a_mdio_switch_fn,
> > + &priv->mux_handle, dev, NULL);
> > +}
>
> Andrew


\
 
 \ /
  Last update: 2019-03-18 10:41    [W:1.674 / U:1.528 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site