lkml.org 
[lkml]   [2019]   [Mar]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/8] fbdev: sm712fb: fix brightness control on reboot, don't set SR30.
Date
On a Thinkpad s30 (Pentium III / i440MX, Lynx3DM), rebooting with
sm712fb framebuffer driver would cause the role of brightness up/down
button to swap.

Experiments showed the FPR30 register caused this behavior. Moreover,
even if this register don't have side-effect on other systems, over-
writing it is also highly questionable, since it was originally
configurated by the motherboard manufacturer by hardwiring pull-down
resistors to indicate the type of LCD panel. We should not mess with
it.

Stop writing to the SR30 (a.k.a FPR30) register.

Signed-off-by: Yifeng Li <tomli@tomli.me>
Cc: stable@vger.kernel.org # v4.4+
---
drivers/video/fbdev/sm712fb.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/video/fbdev/sm712fb.c b/drivers/video/fbdev/sm712fb.c
index d05379affa32..a19655babf67 100644
--- a/drivers/video/fbdev/sm712fb.c
+++ b/drivers/video/fbdev/sm712fb.c
@@ -1145,8 +1145,8 @@ static void sm7xx_set_timing(struct smtcfb_info *sfb)

/* init SEQ register SR30 - SR75 */
for (i = 0; i < SIZE_SR30_SR75; i++)
- if ((i + 0x30) != 0x62 && (i + 0x30) != 0x6a &&
- (i + 0x30) != 0x6b)
+ if ((i + 0x30) != 0x30 && (i + 0x30) != 0x62 &&
+ (i + 0x30) != 0x6a && (i + 0x30) != 0x6b)
smtc_seqw(i + 0x30,
vgamode[j].init_sr30_sr75[i]);

--
2.20.1
\
 
 \ /
  Last update: 2019-03-16 23:25    [W:0.104 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site