lkml.org 
[lkml]   [2019]   [Mar]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 07/11] arm64: dts: meson-g12a-x96-max: Enable BT Module


Le 15/03/2019 22:48, Martin Blumenstingl a écrit :
> Hi Neil,
>
> On Mon, Mar 11, 2019 at 10:57 AM Neil Armstrong <narmstrong@baylibre.com> wrote:
>>
>> Enable the Bluetooth Module on the X96 Max Set-Top-Box.
>>
>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> I didn't have time to test this yet but it looks sane to me, so:
> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
>
>> ---
>> arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts | 12 ++++++++++++
>> 1 file changed, 12 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
>> index 21e5de48613e..61606601fb4f 100644
>> --- a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
>> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
>> @@ -88,6 +88,18 @@
>> };
>> };
>>
>> +&uart_A {
>> + status = "okay";
>> + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
>> + pinctrl-names = "default";
>> + uart-has-rtscts;
>> +
>> + bluetooth {
>> + compatible = "brcm,bcm43438-bt";
>> + shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
> you could add:
> host-wakeup-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>;
> (at least according to the output of /sys/kernel/debug/gpio and the
> .dtb on my X96 Max)

Will add !

>
>
> Regards
> Martin
>

\
 
 \ /
  Last update: 2019-03-16 15:43    [W:0.047 / U:0.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site