Messages in this thread | | | Date | Sat, 16 Mar 2019 15:26:35 +0100 | From | Neil Armstrong <> | Subject | Re: [PATCH 1/9] arm64: dts: meson: g12a: Add AO Clock + Reset Controller support |
| |
Hi,
Le 15/03/2019 22:07, Martin Blumenstingl a écrit : > Hi Neil, > > On Thu, Mar 7, 2019 at 4:14 PM Neil Armstrong <narmstrong@baylibre.com> wrote: >> >> Add nodes and properties for the AO Clocks and Resets. >> >> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> >> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> >> --- >> arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 17 +++++++++++++++++ >> 1 file changed, 17 insertions(+) >> >> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi >> index 191d31db9853..0eb5220da82c 100644 >> --- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi >> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi >> @@ -122,6 +122,23 @@ >> #size-cells = <2>; >> ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>; >> >> + rti: sys-ctrl@0 { >> + compatible = "amlogic,meson-gx-ao-sysctrl", >> + "simple-mfd", "syscon"; >> + reg = <0x0 0x0 0x0 0x1000>; >> + #address-cells = <2>; >> + #size-cells = <2>; >> + ranges = <0x0 0x0 0x0 0x0 0x0 0x1000>; > is this supposed to be 0x1000 (GX uses 0x100 here)? > my understanding is that G12A has the AO CEC at aobus + 0x100, so > using a size of 0x1000 would make it overlap
Hmm, Let me check
Neil
> > > Regards > Martin >
| |