Messages in this thread | | | From | Martin Blumenstingl <> | Date | Fri, 15 Mar 2019 22:07:14 +0100 | Subject | Re: [PATCH 1/9] arm64: dts: meson: g12a: Add AO Clock + Reset Controller support |
| |
Hi Neil,
On Thu, Mar 7, 2019 at 4:14 PM Neil Armstrong <narmstrong@baylibre.com> wrote: > > Add nodes and properties for the AO Clocks and Resets. > > Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> > Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> > --- > arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 17 +++++++++++++++++ > 1 file changed, 17 insertions(+) > > diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi > index 191d31db9853..0eb5220da82c 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi > +++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi > @@ -122,6 +122,23 @@ > #size-cells = <2>; > ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>; > > + rti: sys-ctrl@0 { > + compatible = "amlogic,meson-gx-ao-sysctrl", > + "simple-mfd", "syscon"; > + reg = <0x0 0x0 0x0 0x1000>; > + #address-cells = <2>; > + #size-cells = <2>; > + ranges = <0x0 0x0 0x0 0x0 0x0 0x1000>; is this supposed to be 0x1000 (GX uses 0x100 here)? my understanding is that G12A has the AO CEC at aobus + 0x100, so using a size of 0x1000 would make it overlap
Regards Martin
| |