lkml.org 
[lkml]   [2019]   [Mar]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] kvm/x86/vmx: switch MSR_MISC_FEATURES_ENABLES between host and guest
From
Date
On Thu, 2019-03-14 at 12:28 +0100, Paolo Bonzini wrote:
> On 14/03/19 07:38, Xiaoyao Li wrote:
> > CPUID Faulting is a feature about CPUID instruction. When CPUID Faulting is
> > enabled, all execution of the CPUID instruction outside system-management
> > mode (SMM) cause a general-protection (#GP) if the CPL > 0.
> >
> > About this feature, detailed information can be found at
> >
https://www.intel.com/content/dam/www/public/us/en/documents/application-notes/virtualization-technology-flexmigration-application-note.pdf
> >
> > There is an issue that current kvm doesn't switch the value of
> > MSR_MISC_FEATURES_ENABLES between host and guest. If
> > MSR_MISC_FEATURES_ENABLES
> > exists on the hardware cpu, and host enables CPUID faulting (setting the bit
> > 0
> > of MSR_MISC_FEATURES_ENABLES), it will impact the guest's behavior because
> > cpuid faulting is enabled by host and passed to guest.
> >
> > From my tests, when host enables cpuid faulting, it causes guest boot
> > failure
> > when guest uses *modprobe* to load modules. Below is the error log:
> >
> > [ 1.233556] traps: modprobe[71] general protection fault ip:7f0077f6495c
> > sp:7ffda148d808 error:0 in ld-2.17.so[7f0077f4d000+22000]
> > [ 1.237780] traps: modprobe[73] general protection fault ip:7fad5aba095c
> > sp:7ffd36067378 error:0 in ld-2.17.so[7fad5ab89000+22000]
> > [ 1.241930] traps: modprobe[75] general protection fault ip:7f3edb89495c
> > sp:7fffa1a81308 error:0 in ld-2.17.so[7f3edb87d000+22000]
> > [ 1.245998] traps: modprobe[77] general protection fault ip:7f91d670895c
> > sp:7ffc25fa7f38 error:0 in ld-2.17.so[7f91d66f1000+22000]
> > [ 1.250016] traps: modprobe[79] general protection fault ip:7f0ddbbdc95c
> > sp:7ffe9c34f8d8 error:0 in ld-2.17.so[7f0ddbbc5000+22000]
> >
> > *modprobe* calls CPUID instruction thus causing cpuid faulting in guest.
> > At the end, because guest cannot *modprobe* modules, it boots failure.
> >
> > This patch switches MSR_MISC_FEATURES_ENABLES between host and guest when
> > hardware has this MSR.
> >
> > This patch doesn't confict with the commit db2336a80489 ("KVM: x86:
> > virtualize
> > cpuid faulting"), which provides a software emulation of cpuid faulting for
> > x86 arch. Below analysing how cpuid faulting will work after applying this
> > patch:
> >
> > 1. If host cpu is AMD. It doesn't have MSR_MISC_FEATURES_ENABLES, so we can
> > just
> > use the software emulation of cpuid faulting.
> >
> > 2. If host cpu is Intel and it doesn't have MSR_MISC_FEATURES_ENABLES. The
> > same
> > as case 1, we can just use the software emulation of cpuid faulting.
> >
> > 3. If host cpu is Intel and it has MSR_MISC_FEATURES_ENABLES. With this
> > patch,
> > it will write guest's value into MSR_MISC_FEATURES_ENABLES when vm entry.
> > If guest enables cpuid faulting and when guest calls CPUID instruction with
> > CPL > 0, it will cause #GP exception in guest instead of VM exit because of
> > CPUID, thus it doesn't go to the kvm emualtion path but ues the hardware
> > feature. Also it's a benefit that we needn't use VM exit to inject #GP to
> > emulate cpuid faulting feature.
> >
> > Intel SDM vol3.25.1.1 specifies the priority between cpuid faulting
> > and CPUID instruction.
> >
> > Signed-off-by: Xiaoyao Li <xiaoyao.li@linux.intel.com>
> > ---
> > arch/x86/kvm/vmx/vmx.c | 19 +++++++++++++++++++
> > 1 file changed, 19 insertions(+)
> >
> > diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
> > index 30a6bcd735ec..90707fae688e 100644
> > --- a/arch/x86/kvm/vmx/vmx.c
> > +++ b/arch/x86/kvm/vmx/vmx.c
> > @@ -6321,6 +6321,23 @@ static void atomic_switch_perf_msrs(struct vcpu_vmx
> > *vmx)
> > msrs[i].host, false);
> > }
> >
> > +static void atomic_switch_msr_misc_features_enables(struct kvm_vcpu *vcpu)
> > +{
> > + u64 host_msr;
> > + struct vcpu_vmx *vmx = to_vmx(vcpu);
> > +
> > + /* if MSR MISC_FEATURES_ENABLES doesn't exist on the hardware, do
> > nothing*/
> > + if (rdmsrl_safe(MSR_MISC_FEATURES_ENABLES, &host_msr))
> > + return;
> > +
> > + if (host_msr == vcpu->arch.msr_misc_features_enables)
> > + clear_atomic_switch_msr(vmx, MSR_MISC_FEATURES_ENABLES);
> > + else
> > + add_atomic_switch_msr(vmx, MSR_MISC_FEATURES_ENABLES,
> > + vcpu->arch.msr_misc_features_enables,
> > + host_msr, false);
> > +}
> > +
> > static void vmx_arm_hv_timer(struct vcpu_vmx *vmx, u32 val)
> > {
> > vmcs_write32(VMX_PREEMPTION_TIMER_VALUE, val);
> > @@ -6562,6 +6579,8 @@ static void vmx_vcpu_run(struct kvm_vcpu *vcpu)
> >
> > atomic_switch_perf_msrs(vmx);
> >
> > + atomic_switch_msr_misc_features_enables(vcpu);
> > +
> > vmx_update_hv_timer(vcpu);
> >
> > /*
> >
>
> Adding a RDMSR for this to each vmentry is too heavy. Since we emulate
> MSR_MISC_FEATURES_ENABLES, you can just clear the MSR on vcpu_load and
> restore it on vcpu_put.

It's much better and more efficient.
I will do it this way in next version.

> Also, this needs a test in tools/testing/selftests/kvm.

Sure, I will add that.

> Paolo

\
 
 \ /
  Last update: 2019-03-14 13:14    [W:0.145 / U:0.932 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site