lkml.org 
[lkml]   [2019]   [Mar]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 01/12] dt-bindings: phy: Add support for HiSilicon's hi3660 USB PHY
On Tue, Mar 12, 2019 at 8:40 PM Chen Yu <chenyu56@huawei.com> wrote:
>
> Hi Rob,
>
> On 2019/3/12 21:45, Rob Herring wrote:
> > On Sat, Mar 02, 2019 at 05:04:54PM +0800, Yu Chen wrote:
> >> This patch adds binding documentation for supporting the hi3660 usb
> >> phy on boards like the HiKey960.
> >>
> >> Cc: Rob Herring <robh+dt@kernel.org>
> >> Cc: Mark Rutland <mark.rutland@arm.com>
> >> Cc: John Stultz <john.stultz@linaro.org>
> >> Cc: Binghui Wang <wangbinghui@hisilicon.com>
> >> Signed-off-by: Yu Chen <chenyu56@huawei.com>
> >> ---
> >> v1:
> >> * Fix some format error as suggested by Rob.
> >> v2:
> >> * Change hi3660 usb PHY to hi3660 USB PHY
> >> v3:
> >> * Make device node a subnode of usb3_otg_bc register.
> >> ---
> >> ---
> >> .../devicetree/bindings/phy/phy-hi3660-usb3.txt | 28 ++++++++++++++++++++++
> >> 1 file changed, 28 insertions(+)
> >> create mode 100644 Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt
> >>
> >> diff --git a/Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt b/Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt
> >> new file mode 100644
> >> index 000000000000..6096214a2bc6
> >> --- /dev/null
> >> +++ b/Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt
> >> @@ -0,0 +1,28 @@
> >> +Hisilicon hi3660 USB PHY
> >> +-----------------------
> >> +
> >> +Required properties:
> >> +- compatible: should be "hisilicon,hi3660-usb-phy"
> >> +- #phy-cells: must be 0
> >> +- hisilicon,pericrg-syscon: phandle of syscon used to control phy.
> >> +- hisilicon,pctrl-syscon: phandle of syscon used to control phy.
> >> +- hisilicon,usb3-otg-bc-syscon: phandle of syscon used to control phy.
> >
> > You can drop this as it is now just the parent node.
> >
> >> +- hisilicon,eye-diagram-param: parameter set for phy
> >> +Refer to phy/phy-bindings.txt for the generic PHY binding properties
> >> +
> >> +This is a subnode of usb3_otg_bc register node.
> >> +
> >> +Example:
> >> + usb3_otg_bc: usb3_otg_bc@ff200000 {
> >> + compatible = "syscon", "simple-mfd";
> >
> > This node should have a specific compatible.
> >
> Do you mean I need write a specific driver for this node ?

No, only that you could if needed in the future. You can still use the
fallbacks for now.

Rob

\
 
 \ /
  Last update: 2019-03-13 20:38    [W:0.075 / U:0.320 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site