lkml.org 
[lkml]   [2019]   [Mar]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v7 01/15] sched/core: uclamp: Add CPU's clamp buckets refcounting
On 12-Mar 13:52, Dietmar Eggemann wrote:
> On 2/8/19 11:05 AM, Patrick Bellasi wrote:
>
> [...]
>
> > +config UCLAMP_BUCKETS_COUNT
> > + int "Number of supported utilization clamp buckets"
> > + range 5 20
> > + default 5
> > + depends on UCLAMP_TASK
> > + help
> > + Defines the number of clamp buckets to use. The range of each bucket
> > + will be SCHED_CAPACITY_SCALE/UCLAMP_BUCKETS_COUNT. The higher the
> > + number of clamp buckets the finer their granularity and the higher
> > + the precision of clamping aggregation and tracking at run-time.
> > +
> > + For example, with the default configuration we will have 5 clamp
> > + buckets tracking 20% utilization each. A 25% boosted tasks will be
> > + refcounted in the [20..39]% bucket and will set the bucket clamp
> > + effective value to 25%.
> > + If a second 30% boosted task should be co-scheduled on the same CPU,
> > + that task will be refcounted in the same bucket of the first task and
> > + it will boost the bucket clamp effective value to 30%.
> > + The clamp effective value of a bucket is reset to its nominal value
> > + (20% in the example above) when there are anymore tasks refcounted in
>
> this sounds weird.

Why ?

>
> [...]
>
> > +static inline unsigned int uclamp_bucket_value(unsigned int clamp_value)
> > +{
> > + return UCLAMP_BUCKET_DELTA * uclamp_bucket_id(clamp_value);
> > +}
>
> Soemthing like uclamp_bucket_nominal_value() should be clearer.

Maybe... can update it in v8

> > +static inline void uclamp_rq_update(struct rq *rq, unsigned int clamp_id)
> > +{
> > + struct uclamp_bucket *bucket = rq->uclamp[clamp_id].bucket;
> > + unsigned int max_value = uclamp_none(clamp_id);
> > + unsigned int bucket_id;
>
> unsigned int bucket_id = UCLAMP_BUCKETS;
>
> > +
> > + /*
> > + * Both min and max clamps are MAX aggregated, thus the topmost
> > + * bucket with some tasks defines the rq's clamp value.
> > + */
> > + bucket_id = UCLAMP_BUCKETS;
>
> to get rid of this line?

I put it on a different line as a justfication for the loop variable
initialization described in the comment above.

>
> > + do {
> > + --bucket_id;
> > + if (!rq->uclamp[clamp_id].bucket[bucket_id].tasks)
>
> if (!bucket[bucket_id].tasks)

Right... that's some leftover from the last refactoring!

[...]

> > + * within each bucket the exact "requested" clamp value whenever all tasks
> > + * RUNNABLE in that bucket require the same clamp.
> > + */
> > +static inline void uclamp_rq_inc_id(struct task_struct *p, struct rq *rq,
> > + unsigned int clamp_id)
> > +{
> > + unsigned int bucket_id = p->uclamp[clamp_id].bucket_id;
> > + unsigned int rq_clamp, bkt_clamp, tsk_clamp;
>
> Wouldn't it be easier to have a pointer to the task's and rq's uclamp
> structure as well to the bucket?
>
> - unsigned int bucket_id = p->uclamp[clamp_id].bucket_id;
> + struct uclamp_se *uc_se = &p->uclamp[clamp_id];
> + struct uclamp_rq *uc_rq = &rq->uclamp[clamp_id];
> + struct uclamp_bucket *bucket = &uc_rq->bucket[uc_se->bucket_id];

I think I went back/forth a couple of times in using pointer or the
extended version, which both have pros and cons.

I personally prefer the pointers as you suggest but I've got the
impression in the past that since everybody cleared "basic C trainings"
it's not so difficult to read the code above too.

> The code in uclamp_rq_inc_id() and uclamp_rq_dec_id() for example becomes
> much more readable.

Agree... let's try to switch once again in v8 and see ;)

> [...]
>
> > struct sched_class {
> > const struct sched_class *next;
> > +#ifdef CONFIG_UCLAMP_TASK
> > + int uclamp_enabled;
> > +#endif
> > +
> > void (*enqueue_task) (struct rq *rq, struct task_struct *p, int flags);
> > void (*dequeue_task) (struct rq *rq, struct task_struct *p, int flags);
> > - void (*yield_task) (struct rq *rq);
> > - bool (*yield_to_task)(struct rq *rq, struct task_struct *p, bool preempt);
> > void (*check_preempt_curr)(struct rq *rq, struct task_struct *p, int flags);
> > @@ -1685,7 +1734,6 @@ struct sched_class {
> > void (*set_curr_task)(struct rq *rq);
> > void (*task_tick)(struct rq *rq, struct task_struct *p, int queued);
> > void (*task_fork)(struct task_struct *p);
> > - void (*task_dead)(struct task_struct *p);
> > /*
> > * The switched_from() call is allowed to drop rq->lock, therefore we
> > @@ -1702,12 +1750,17 @@ struct sched_class {
> > void (*update_curr)(struct rq *rq);
> > + void (*yield_task) (struct rq *rq);
> > + bool (*yield_to_task)(struct rq *rq, struct task_struct *p, bool preempt);
> > +
> > #define TASK_SET_GROUP 0
> > #define TASK_MOVE_GROUP 1
> > #ifdef CONFIG_FAIR_GROUP_SCHED
> > void (*task_change_group)(struct task_struct *p, int type);
> > #endif
> > +
> > + void (*task_dead)(struct task_struct *p);
>
> Why do you move yield_task, yield_to_task and task_dead here?

Since I'm adding a new field at the beginning of the struct, which is
used at enqueue/dequeue time, this is to ensure that all the
callbacks used in these paths are grouped together and don't fall
across a cache line... but yes, that's supposed to be a
micro-optimization which I can skip in this patch.

--
#include <best/regards.h>

Patrick Bellasi

\
 
 \ /
  Last update: 2019-03-13 16:16    [W:0.276 / U:22.464 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site