lkml.org 
[lkml]   [2019]   [Mar]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v1] Bluetooth: hci_qca: Give enough time to ROME controller to bootup.
在 2019-03-07 14:49,Balakrishna Godavarthi 写道:
> Hi Stepen,
>
> On 2019-03-07 04:03, Stephen Boyd wrote:
>> Quoting Balakrishna Godavarthi (2019-03-06 08:21:13)
>>> This patch enables enough time to ROME controller to bootup
>>> after we bring the enable ping out of reset.
>>>
>>> Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
>>> ---
>>
>> Any Fixes tag? And maybe some more explanation or background on where
>> 150 ms sleep comes from would be useful. Was it determined
>> experimentally or did it come from a datasheet somewhere? Does the
>> time
>> differ between boards?
>>
> [Bala]: this was observed in our stress testing and even the CHIP
> firmware team
> confirmed that BT chip required at least 150 ms to boot up.
>
> @Rocky to confirm my statement.
>
>>> drivers/bluetooth/hci_qca.c | 2 ++
>>> 1 file changed, 2 insertions(+)
>>>
>>> diff --git a/drivers/bluetooth/hci_qca.c
>>> b/drivers/bluetooth/hci_qca.c
>>> index 237aea34b69f..1953b13511e7 100644
>>> --- a/drivers/bluetooth/hci_qca.c
>>> +++ b/drivers/bluetooth/hci_qca.c
>>> @@ -508,6 +508,8 @@ static int qca_open(struct hci_uart *hu)
>>> qcadev = serdev_device_get_drvdata(hu->serdev);
>>> if (qcadev->btsoc_type != QCA_WCN3990) {
>>> gpiod_set_value_cansleep(qcadev->bt_en, 1);
>>> + /* Controller needs time to bootup. */
>>> + msleep(150);
>>> } else {
>>> hu->init_speed = qcadev->init_speed;
>>> hu->oper_speed = qcadev->oper_speed;

Hello,

Any concern to merge this change? Without this change the Rome cannot up
while running the serdev way, we should mainline this change ASAP.

\
 
 \ /
  Last update: 2019-03-13 10:47    [W:0.058 / U:0.620 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site