lkml.org 
[lkml]   [2019]   [Mar]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.9 89/96] ARM: dts: exynos: Fix pinctrl definition for eMMC RTSN line on Odroid X2/U3
Date
4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Marek Szyprowski <m.szyprowski@samsung.com>

commit ec33745bccc8f336957c751f4153421cc9ef5a54 upstream.

Commit 225da7e65a03 ("ARM: dts: add eMMC reset line for
exynos4412-odroid-common") added MMC power sequence for eMMC card of
Odroid X2/U3. It reused generic sd1_cd pin control configuration node
and only disabled pull-up. However that time the pinctrl configuration
was not applied during MMC power sequence driver initialization. This
has been changed later by commit d97a1e5d7cd2 ("mmc: pwrseq: convert to
proper platform device").

It turned out then, that the provided pinctrl configuration is not
correct, because the eMMC_RTSN line is being re-configured as 'special
function/card detect function for mmc1 controller' not the simple
'output', thus the power sequence driver doesn't really set the pin
value. This in effect broke the reboot of Odroid X2/U3 boards. Fix this
by providing separate node with eMMC_RTSN pin configuration.

Cc: <stable@vger.kernel.org>
Reported-by: Markus Reichl <m.reichl@fivetechno.de>
Suggested-by: Ulf Hansson <ulf.hansson@linaro.org>
Fixes: 225da7e65a03 ("ARM: dts: add eMMC reset line for exynos4412-odroid-common")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 13 ++++++-------
1 file changed, 6 insertions(+), 7 deletions(-)

--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -70,7 +70,7 @@
};

emmc_pwrseq: pwrseq {
- pinctrl-0 = <&sd1_cd>;
+ pinctrl-0 = <&emmc_rstn>;
pinctrl-names = "default";
compatible = "mmc-pwrseq-emmc";
reset-gpios = <&gpk1 2 GPIO_ACTIVE_LOW>;
@@ -161,12 +161,6 @@
cpu0-supply = <&buck2_reg>;
};

-/* RSTN signal for eMMC */
-&sd1_cd {
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-};
-
&pinctrl_1 {
gpio_power_key: power_key {
samsung,pins = "gpx1-3";
@@ -184,6 +178,11 @@
samsung,pins = "gpx3-7";
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
};
+
+ emmc_rstn: emmc-rstn {
+ samsung,pins = "gpk1-2";
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
};

&ehci {

\
 
 \ /
  Last update: 2019-03-12 18:21    [W:0.502 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site