lkml.org 
[lkml]   [2019]   [Mar]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/2] dt-bindings: net: can: binding for CTU CAN FD open-source IP core.
On Wed, Feb 27, 2019 at 06:26:29PM +0100, pisa@cmp.felk.cvut.cz wrote:
> From: Pavel Pisa <pisa@cmp.felk.cvut.cz>
>
> Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
> ---
> .../devicetree/bindings/net/can/ctu,ctucanfd.txt | 108 +++++++++++++++++++++
> 1 file changed, 108 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/net/can/ctu,ctucanfd.txt
>
> diff --git a/Documentation/devicetree/bindings/net/can/ctu,ctucanfd.txt b/Documentation/devicetree/bindings/net/can/ctu,ctucanfd.txt
> new file mode 100644
> index 000000000000..fea9c08b79ec
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/can/ctu,ctucanfd.txt
> @@ -0,0 +1,108 @@
> +Memory mapped CTU CAN FD open-source IP core
> +
> +The core sources and documentation on project page
> +
> + https://gitlab.fel.cvut.cz/canbus/ctucanfd_ip_core
> + http://canbus.pages.fel.cvut.cz/ctucanfd_ip_core/Progdokum.pdf
> +
> +Integration in Xilinx Zynq SoC based system together with
> +OpenCores SJA1000 compatible controllers
> +
> + https://gitlab.fel.cvut.cz/canbus/zynq/zynq-can-sja1000-top
> +
> +Martin Jerabek's dimploma thesis with integration and testing
> +framework description
> +
> + https://dspace.cvut.cz/bitstream/handle/10467/80366/F3-DP-2019-Jerabek-Martin-Jerabek-thesis-2019-canfd.pdf
> +
> +Required properties:
> +
> +- compatible : should be one of "ctu,ctucanfd", "ctu,canfd-2".
> + The "canfd-2" has been reserved for older revision of the IP core.
> + The revision can be read from the IP core register as well.
> +
> +- reg = <(baseaddr) (size)> : specify mapping into physical address
> + space of the processor system.
> +
> +- interrupts : property with a value describing the interrupt source
> + required for the CTU CAN FD. For Zynq SoC system format is
> + <(is_spi) (number) (type)> where is_spi defines if it is SPI
> + (shared peripheral) interrupt, the second number is translated
> + to the vector by addition of 32 on Zynq-7000 systems and type
> + is IRQ_TYPE_LEVEL_HIGH (4) for Zynq.
> +
> +- interrupt-parent = <&interrupt-controller-phandle> :
> + is required for Zynq SoC to find map interrupt
> + to the correct controller

Remove as this is implied and could be in a parent node.

> +
> +- clocks: phandle of reference clock (100 MHz is appropriate
> + for FPGA implementation on Zynq-7000 system).
> +
> +Optional properties:
> +
> +- clock-names: not used in actual design but if more clocks are used
> + by cores then "can_clk" would be clock source name for the clocks
> + used to define CAN time-quanta.
> +
> +Example when integrated to Zynq-7000 system DTS:
> +
> + / {
> + /* ... */
> + amba: amba {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "simple-bus";
> +
> + ctu_can_fd_0: ctu_can_fd@43c30000 {

can@...

> + compatible = "ctu,ctucanfd";
> + interrupt-parent = <&intc>;
> + interrupts = <0 30 4>;
> + clocks = <&clkc 15>;
> + reg = <0x43c30000 0x10000>;
> + };
> + };
> + };
> +
> +
> +Example when used as DTS overlay on Zynq-7000 system:
> +
> +
> +// Device Tree Example: Full Reconfiguration without Bridges

Drop this example. Overlays are outside the scope of bindings.

> +/dts-v1/;
> +/plugin/;
> +
> +/ {
> + fragment@0 {
> + target-path = "/fpga-full";
> +
> + __overlay__ {
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + firmware-name = "system.bit.bin";
> + };
> + };
> +
> + fragment@1 {
> + target-path = "/amba";
> + __overlay__ {
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + ctu_can_fd_0: ctu_can_fd@43c30000 {
> + compatible = "ctu,ctucanfd";
> + interrupt-parent = <&intc>;
> + interrupts = <0 30 4>;
> + clocks = <&clkc 15>;
> + reg = <0x43c30000 0x10000>;
> + };
> + ctu_can_fd_1: ctu_can_fd@43c70000 {
> + compatible = "ctu,ctucanfd";
> + interrupt-parent = <&intc>;
> + interrupts = <0 31 4>;
> + clocks = <&clkc 15>;
> + reg = <0x43c70000 0x10000>;
> + };
> + };
> + };
> +};
> --
> 2.11.0
>

\
 
 \ /
  Last update: 2019-03-12 16:55    [W:0.854 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site