lkml.org 
[lkml]   [2019]   [Mar]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v1] Bluetooth: hci_qca: Enable the ldisc for ROME for x86 platforms.
Hi Rocky,

On Tue, Mar 12, 2019 at 05:01:59PM +0800, rjliao@codeaurora.org wrote:
> 在 2019-03-09 02:52,Matthias Kaehlcke 写道:
> > On Fri, Mar 08, 2019 at 10:43:14AM +0530, Balakrishna Godavarthi wrote:
> > > Hi Matthias,
> > >
> > > On 2019-03-08 02:12, Matthias Kaehlcke wrote:
> > > > Hi Balakrishna,
> > > >
> > > > On Thu, Mar 07, 2019 at 03:47:22PM +0530, Balakrishna Godavarthi wrote:
> > > > > When using btattach to setup Rome over ldisc we observed a crash
> > > > > in qca_setup as it will try to access the serdev which is not
> > > > > available in the ldisc proto. This patch will fix the crash by
> > > > > support both the ldisc and serdev way in the qca hci_uart driver.
> > > > >
> > > > > Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
> > > >
> > > > Oh, I wasn't aware of the instantiation through ldisc and was actually
> > > > considering to *remove* some of the seemingly unnecessary serdev
> > > > checks.
> > > >
> > > > > ---
> > > > > drivers/bluetooth/hci_qca.c | 47
> > > > > ++++++++++++++++++++++---------------
> > > > > 1 file changed, 28 insertions(+), 19 deletions(-)
> > > > >
> > > > > diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
> > > > > index 237aea34b69f..0a5c98d46864 100644
> > > > > --- a/drivers/bluetooth/hci_qca.c
> > > > > +++ b/drivers/bluetooth/hci_qca.c
> > > > > @@ -963,7 +963,7 @@ static int qca_set_baudrate(struct hci_dev
> > > > > *hdev, uint8_t baudrate)
> > > > > {
> > > > > struct hci_uart *hu = hci_get_drvdata(hdev);
> > > > > struct qca_data *qca = hu->priv;
> > > > > - struct qca_serdev *qcadev;
> > > > > + struct qca_serdev *qcadev = NULL;
> > > >
> > > > In many cases the only field that is accessed is qcadev->btsoc_type. I
> > > > think something like 'qca_get_soc_type(struct hci_dev *hdev / struct
> > > > hci_uart *hu)' would make things more readable.
> > > >
> > > [Bala]: sure will update this in other patch once this change is
> > > landed as
> > > this has to
> > > go in priority as we have crash coming.
> >
> > That's not how things should work, especially for fairly trivial
> > changes. It requires reviewers to first spent time to review the patch
> > that adds clutter and later spend more time to review the one that
> > removes it. It's also easier to get a clean patch merged in the first
> > place, rather than a noisy one.
> >
> > Anyway, here is my take at it:
> > https://lore.kernel.org/patchwork/patch/1049014/
> >
> > Please help with testing for ROME, unless you disagree with the
> > approach.
> >
> > Thanks
> >
> > Matthias
>
> Hi Matthias,
>
> I will test your patch and update to you, and you are correct that AR3002 is
> not part of Rome family, you should use QCA_ROME as the default return of
> qca_soc_type.

Thanks for the confirmation!

> Could you also loop me in
> https://lore.kernel.org/patchwork/patch/1049014/?

This patch has been superseded by a newer version:

https://lore.kernel.org/patchwork/patch/1049696/

It already landed in bluetooth-next.

Testing with Rome and ldisc would still be appreciated, since I don't
have such a configuration.

Thanks

Matthias

\
 
 \ /
  Last update: 2019-03-12 16:53    [W:0.111 / U:0.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site