lkml.org 
[lkml]   [2019]   [Mar]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] arm64: dts: fsl: imx8mq: enable the thermal management unit (TMU)
Date
From
On 2019-03-11 19:35, Andrey Smirnov wrote:
> On Mon, Mar 11, 2019 at 2:35 PM Angus Ainslie (Purism) <angus@akkea.ca>
> wrote:
>>
>> These are the TMU nodes from the NXP vendor kernel
>>
>
> Hey Angus,
>
> TMU block supports multiple thermal zones and vendor kernel doesn't
> really account for that (see below). Latest version of the driver in
> thermal tree now actually supports that feature (mulit-sensor), so I
> think the code in DT should reflect that as well. I recently submitted
> a series adding HWMON integration for TMU
> (https://lore.kernel.org/lkml/20190222200508.26325-1-andrew.smirnov@gmail.com/T/#u)
> and this is my take on this patch:
>
> https://github.com/ndreys/linux/commit/09931e3d60af0a74377307b433db97da1be31570
>
> All of the code there is up for grabs, if you feel like using it.

Thanks, I would prefer to use the multi sensor code but I assumed it
wasn't in yet so I followed

Documentation/devicetree/bindings/thermal/qoriq-thermal.txt

I'll try some testing with the DT fragment you suggested.

>
>> Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
>> ---
>> arch/arm64/boot/dts/freescale/imx8mq.dtsi | 83
>> +++++++++++++++++++++++
>> 1 file changed, 83 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
>> b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
>> index 9155bd4784eb..087620c6e17f 100644
>> --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
>> +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
>> @@ -8,6 +8,7 @@
>> #include <dt-bindings/power/imx8mq-power.h>
>> #include <dt-bindings/gpio/gpio.h>
>> #include <dt-bindings/interrupt-controller/arm-gic.h>
>> +#include <dt-bindings/thermal/thermal.h>
>> #include "imx8mq-pinfunc.h"
>>
>> / {
>> @@ -89,6 +90,7 @@
>> reg = <0x0>;
>> enable-method = "psci";
>> next-level-cache = <&A53_L2>;
>> + #cooling-cells = <2>;
>> };
>>
>> A53_1: cpu@1 {
>> @@ -210,6 +212,87 @@
>> #interrupt-cells = <2>;
>> };
>>
>> + tmu: tmu@30260000 {
>> + compatible = "fsl,imx8mq-tmu";
>> + reg = <0x30260000 0x10000>;
>> + interrupt = <GIC_SPI 49
>> IRQ_TYPE_LEVEL_HIGH>;
>> + little-endian;
>> + fsl,tmu-range = <0xb0000 0xa0026
>> 0x80048 0x70061>;
>> + fsl,tmu-calibration = <0x00000000
>> 0x00000023
>> + 0x00000001
>> 0x00000029
>> + 0x00000002
>> 0x0000002f
>> + 0x00000003
>> 0x00000035
>> + 0x00000004
>> 0x0000003d
>> + 0x00000005
>> 0x00000043
>> + 0x00000006
>> 0x0000004b
>> + 0x00000007
>> 0x00000051
>> + 0x00000008
>> 0x00000057
>> + 0x00000009
>> 0x0000005f
>> + 0x0000000a
>> 0x00000067
>> + 0x0000000b
>> 0x0000006f
>> +
>> + 0x00010000
>> 0x0000001b
>> + 0x00010001
>> 0x00000023
>> + 0x00010002
>> 0x0000002b
>> + 0x00010003
>> 0x00000033
>> + 0x00010004
>> 0x0000003b
>> + 0x00010005
>> 0x00000043
>> + 0x00010006
>> 0x0000004b
>> + 0x00010007
>> 0x00000055
>> + 0x00010008
>> 0x0000005d
>> + 0x00010009
>> 0x00000067
>> + 0x0001000a
>> 0x00000070
>> +
>> + 0x00020000
>> 0x00000017
>> + 0x00020001
>> 0x00000023
>> + 0x00020002
>> 0x0000002d
>> + 0x00020003
>> 0x00000037
>> + 0x00020004
>> 0x00000041
>> + 0x00020005
>> 0x0000004b
>> + 0x00020006
>> 0x00000057
>> + 0x00020007
>> 0x00000063
>> + 0x00020008
>> 0x0000006f
>> +
>> + 0x00030000
>> 0x00000015
>> + 0x00030001
>> 0x00000021
>> + 0x00030002
>> 0x0000002d
>> + 0x00030003
>> 0x00000039
>> + 0x00030004
>> 0x00000045
>> + 0x00030005
>> 0x00000053
>> + 0x00030006
>> 0x0000005f
>> + 0x00030007
>> 0x00000071>;
>> + #thermal-sensor-cells = <0>;
>
> As per #thermal-sensor-cells must be 1 (see
> Documentation/devicetree/bindings/thermal/qoriq-thermal.txt), since as
> I mentioned above there are multiple thermal zones (CPU, GPU, VPU).

Thanks I missed that bringing it over.

Angus Ainslie

>
>> + };
>> +
>> + thermal-zones {
>> + cpu-thermal {
>> + polling-delay-passive = <250>;
>> + polling-delay = <2000>;
>> + thermal-sensors = <&tmu>;
>
> Ditto.
>
> Thanks,
> Andrey Smirnov

\
 
 \ /
  Last update: 2019-03-12 13:55    [W:0.134 / U:0.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site