lkml.org 
[lkml]   [2019]   [Mar]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v8 1/4] can: m_can: Create a m_can platform framework
From
Date
Hello Dan,

Am 12.03.19 um 13:12 schrieb Dan Murphy:
> Create a m_can platform framework that peripherial
> devices can register to and use common code and register sets.
> The peripherial devices may provide read/write and configuration
> support of the IP.
>
> Signed-off-by: Dan Murphy <dmurphy@ti.com>
> ---
>
> v8 - Added a clean function for the tx_skb, cleaned up skb on BUS_OFF and on xmit
> BUSY - https://lore.kernel.org/patchwork/patch/1047980/
>
> v7 - Fixed remaining new checkpatch issues, removed CSR setting, fixed tx hard
> start function to return tx_busy, and renamed device callbacks - https://lore.kernel.org/patchwork/patch/1047220/
> v6 - Squashed platform patch to this patch for bissectablity, fixed coding style
> issues, updated Kconfig help, placed mcan reg offsets back into c file, renamed
> priv->skb to priv->tx_skb and cleared perp interrupts at ISR start -
> Patch 1 comments - https://lore.kernel.org/patchwork/patch/1042446/
> Patch 2 comments - https://lore.kernel.org/patchwork/patch/1042442/
>
> drivers/net/can/m_can/Kconfig | 13 +-
> drivers/net/can/m_can/Makefile | 1 +
> drivers/net/can/m_can/m_can.c | 717 +++++++++++++------------
> drivers/net/can/m_can/m_can.h | 110 ++++
> drivers/net/can/m_can/m_can_platform.c | 202 +++++++
> 5 files changed, 699 insertions(+), 344 deletions(-)
> create mode 100644 drivers/net/can/m_can/m_can.h
> create mode 100644 drivers/net/can/m_can/m_can_platform.c
>
> diff --git a/drivers/net/can/m_can/Kconfig b/drivers/net/can/m_can/Kconfig
> index 04f20dd39007..f7119fd72df4 100644
> --- a/drivers/net/can/m_can/Kconfig
> +++ b/drivers/net/can/m_can/Kconfig
> @@ -1,5 +1,14 @@
> config CAN_M_CAN
> + tristate "Bosch M_CAN support"
> + ---help---
> + Say Y here if you want support for Bosch M_CAN controller framework.
> + This is common support for devices that embed the Bosch M_CAN IP.
> +
> +config CAN_M_CAN_PLATFORM
> + tristate "Bosch M_CAN support for io-mapped devices"
> depends on HAS_IOMEM
> - tristate "Bosch M_CAN devices"
> + depends on CAN_M_CAN
> ---help---
> - Say Y here if you want to support for Bosch M_CAN controller.
> + Say Y here if you want support for IO Mapped Bosch M_CAN controller.
> + This support is for devices that have the Bosch M_CAN controller
> + IP embedded into the device and the IP is IO Mapped to the processor.
> diff --git a/drivers/net/can/m_can/Makefile b/drivers/net/can/m_can/Makefile
> index 8bbd7f24f5be..057bbcdb3c74 100644
> --- a/drivers/net/can/m_can/Makefile
> +++ b/drivers/net/can/m_can/Makefile
> @@ -3,3 +3,4 @@
> #
>
> obj-$(CONFIG_CAN_M_CAN) += m_can.o
> +obj-$(CONFIG_CAN_M_CAN_PLATFORM) += m_can_platform.o

... snip ...

> diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
> -static int m_can_dev_setup(struct platform_device *pdev, struct net_device *dev,
> - void __iomem *addr)
> +static int m_can_dev_setup(struct m_can_priv *m_can_dev)
> {
> - struct m_can_priv *priv;
> + struct net_device *dev = m_can_dev->net;
> int m_can_version;
>
> - m_can_version = m_can_check_core_release(addr);
> + m_can_version = m_can_check_core_release(m_can_dev);

What is m_can_version for the tcan4x5x?

... snip ...

Wolfgang.

\
 
 \ /
  Last update: 2019-03-12 13:44    [W:1.137 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site