Messages in this thread Patch in this message | | | From | Chuanhong Guo <> | Subject | [PATCH] arm64: dts: meson-gxl-s905d-phicomm-n1: add status LED | Date | Tue, 12 Mar 2019 16:33:26 +0800 |
| |
There is a white LED on the front panel behind the logo and the manufacturer uses that LED to indicate network and USB drive status.
Signed-off-by: Chuanhong Guo <gch981213@gmail.com> --- .../boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts index 9a8a8a7e4b53..b5667f1fb2c8 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts @@ -14,6 +14,16 @@ cvbs-connector { status = "disabled"; }; + + leds { + compatible = "gpio-leds"; + + status { + label = "n1:white:status"; + gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; }; &cvbs_vdac_port { -- 2.20.1
| |