lkml.org 
[lkml]   [2019]   [Mar]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 03/25] dt-bindings: leds: Add LED_FUNCTION definitions
From
Date
Hi Dan,

Thanks for the review.

On 3/11/19 1:22 PM, Dan Murphy wrote:
> Jacek
>
> On 3/10/19 1:28 PM, Jacek Anaszewski wrote:
>> Add common LED function definitions for use in Device Tree.
>> The function names were extracted from existing dts files
>> after eliminating oddities.
>>
>> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
>> Cc: Baolin Wang <baolin.wang@linaro.org>
>> Cc: Daniel Mack <daniel@zonque.org>
>> Cc: Dan Murphy <dmurphy@ti.com>
>> Cc: Linus Walleij <linus.walleij@linaro.org>
>> Cc: Oleh Kravchenko <oleg@kaa.org.ua>
>> Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
>> Cc: Simon Shields <simon@lineageos.org>
>> ---
>> include/dt-bindings/leds/common.h | 38 ++++++++++++++++++++++++++++++++++++++
>> 1 file changed, 38 insertions(+)
>>
>> diff --git a/include/dt-bindings/leds/common.h b/include/dt-bindings/leds/common.h
>> index e171d0a6beb2..ffcd46317307 100644
>> --- a/include/dt-bindings/leds/common.h
>> +++ b/include/dt-bindings/leds/common.h
>> @@ -19,4 +19,42 @@
>> #define LEDS_BOOST_ADAPTIVE 1
>> #define LEDS_BOOST_FIXED 2
>>
>> +/* Standard LED functions */
>> +#define LED_FUNCTION_ACTIVITY "activity"
>> +#define LED_FUNCTION_ADSL "adsl"
>> +#define LED_FUNCTION_ALARM "alarm"
>> +#define LED_FUNCTION_BACKLIGHT "backlight"
>> +#define LED_FUNCTION_BLUETOOTH "bluetooth"
>> +#define LED_FUNCTION_BOOT "boot"
>> +#define LED_FUNCTION_CHRG "chrg"
>
> Why not spell out charge?

It was in one of existing dts files.
I have no issue with that, will change it to "charge".

>
>> +#define LED_FUNCTION_DEBUG "debug"
>> +#define LED_FUNCTION_DISK "disk"
>> +#define LED_FUNCTION_DISK_READ "disk-read"
>> +#define LED_FUNCTION_DISK_WRITE "disk-write"
>> +#define LED_FUNCTION_FAULT "fault"
>> +#define LED_FUNCTION_FLASH "flash"
>> +#define LED_FUNCTION_HDDERR "hdderr"
>> +#define LED_FUNCTION_HEARTBEAT "heartbeat"
>> +#define LED_FUNCTION_INDICATOR "indicator"
>> +#define LED_FUNCTION_INFO "info"
>> +#define LED_FUNCTION_INTERNET "internet"
>
> LEDs function can be for keyboards and keypads.
>
> Keypad for hand held devices
>
> #define LED_FUNCTION_KEYBOARD "keyboard"
> #define LED_FUNCTION_KEYPAD "keypad"

Ack.

>
>> +#define LED_FUNCTION_LAN "lan"
>> +#define LED_FUNCTION_MMC "mmc"
>> +#define LED_FUNCTION_NAND "nand"
>> +#define LED_FUNCTION_ON "on"
>> +#define LED_FUNCTION_PROGRAMMING "programming"
>> +#define LED_FUNCTION_PWR "pwr"
>
> Same comment as above on chrg

Ack.

>> +#define LED_FUNCTION_RX "rx"
>> +#define LED_FUNCTION_SD "sd"
>> +#define LED_FUNCTION_SLEEP "sleep"
>> +#define LED_FUNCTION_STANDBY "standby"
>> +#define LED_FUNCTION_STATUS "status"
>> +#define LED_FUNCTION_TORCH "torch"
>> +#define LED_FUNCTION_TV "tv"
>> +#define LED_FUNCTION_TX "tx"
>> +#define LED_FUNCTION_USB "usb"
>> +#define LED_FUNCTION_WAN "wan"
>> +#define LED_FUNCTION_WLAN "wlan"
>> +#define LED_FUNCTION_WPS "wps"
>> +
>
> Dan
>
>> #endif /* __DT_BINDINGS_LEDS_H */
>>
>
>

--
Best regards,
Jacek Anaszewski

\
 
 \ /
  Last update: 2019-03-11 18:23    [W:0.484 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site