lkml.org 
[lkml]   [2019]   [Mar]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] drm/vkms: Solve bug on kms_crc_cursor tests
On Sun, Mar 10, 2019 at 05:35:05PM -0300, Rodrigo Siqueira wrote:
> On 03/01, Ville Syrjälä wrote:
> > On Fri, Mar 01, 2019 at 03:35:35PM -0300, Shayenne Moura wrote:
> > > Em sex, 1 de mar de 2019 às 12:26, Ville Syrjälä
> > > <ville.syrjala@linux.intel.com> escreveu:
> > > >
> > > > On Fri, Mar 01, 2019 at 11:55:11AM -0300, Shayenne Moura wrote:
> > > > > Em qui, 28 de fev de 2019 às 11:03, Ville Syrjälä
> > > > > <ville.syrjala@linux.intel.com> escreveu:
> > > > > >
> > > > > > On Thu, Feb 28, 2019 at 11:11:07AM +0100, Daniel Vetter wrote:
> > > > > > > On Mon, Feb 25, 2019 at 11:26:06AM -0300, Shayenne Moura wrote:
> > > > > > > > vkms_crc_work_handle needs the value of the actual frame to
> > > > > > > > schedule the workqueue that calls periodically the vblank
> > > > > > > > handler and the destroy state functions. However, the frame
> > > > > > > > value returned from vkms_vblank_simulate is updated and
> > > > > > > > diminished in vblank_get_timestamp because it is not in a
> > > > > > > > vblank interrupt, and return an inaccurate value.
> > > > > > > >
> > > > > > > > Solve this getting the actual vblank frame directly from the
> > > > > > > > vblank->count inside the `struct drm_crtc`, instead of using
> > > > > > > > the `drm_accurate_vblank_count` function.
> > > > > > > >
> > > > > > > > Signed-off-by: Shayenne Moura <shayenneluzmoura@gmail.com>
> > > > > > >
> > > > > > > Sorry for the delay, I'm a bit swamped right now :-/
> > > > > > >
> > > > > > > Debug work you're doing here is really impressive! But I have no idea
> > > > > > > what's going on. It doesn't look like it's just papering over a bug (like
> > > > > > > the in_vblank_irq check we've discussed on irc), but I also have no idea
> > > > > > > why it works.
> > > > > > >
> > > > > > > I'll pull in Ville, he understands this better than me.
> > > > > >
> > > > > > It's not entirely clear what we're trying to fix. From what I can see
> > > > > > the crc work seems to be in no way synchronized with page flips, so
> > > > > > I'm not sure how all this is really supposed to work.
> > > > > >
> > > > >
> > > > > Hi, Ville!
> > > > >
> > > > > Thank you for the review! :)
> > > > >
> > > > > I do not understand well what crc code is doing, but the issue that I found
> > > > > is related to the vblank timestamp and frame count.
> > > > >
> > > > > When vkms handles the crc_cursor it uses the start frame and end frame
> > > > > values to verify if it needs to call the function 'drm_crtc_add_crc_entry()'
> > > > > for each frame.
> > > > >
> > > > > However, when getting the frame count, the code is calling the function
> > > > > drm_update_vblank_count(dev, pipe, false) and, because of the 'false',
> > > > > subtracting the actual vblank timestamp (consequently, the frame count
> > > > > value), causing conflicts.
> > > >
> > > > The in_vblank_irq behavour looks sane to me. What are these conflicts?
> > > >
> > >
> > > The entire history was:
> > > - I sent the patch with bugfix for vblank extra frame. The patch changed
> > > our function vkms_get_vblank_timestamp() to look like this:
> > >
> > > bool vkms_get_vblank_timestamp(struct drm_device *dev, unsigned int pipe,
> > > int *max_error, ktime_t *vblank_time,
> > > bool in_vblank_irq)
> > > {
> > > struct vkms_device *vkmsdev = drm_device_to_vkms_device(dev);
> > > struct vkms_output *output = &vkmsdev->output;
> > >
> > > *vblank_time = output->vblank_hrtimer.node.expires;
> > >
> > > + if (!in_vblank_irq)
> > > + *vblank_time -= output->period_ns;
> > >
> > > return true;
> > > }
> > >
> > > - This patch solve the issue that I was looking for (extra vblank
> > > frames on kms_flip).
> > >
> > > - However, kms_cursor_crc tests, which passed before my patch, started to fail.
> > >
> > > - Debugging them, I found that the problem was inside of function
> > > `vkms_vblank_simulate()`
> > > when it was handling the crc_enabled (inside if (state && output->crc_enabled))
> > > and inside the function vkms_crc_work_handle() too.
> > >
> > > - Following the steps:
> > > 1. Inside vkms_vblank_simulate() we call drm_crtc_accurate_vblank_count()
> > > 2. In its turn, drm_crtc_accurate_vblank_count() calls the function
> > > drm_update_vblank_count(dev, pipe, false). /* This false is default */
> > > 3. Finally, the “false” used in drm_update_vblank_count(), will be
> > > passed to vkms_get_vblank_timestamp() and the condition “if
> > > (!in_vblank_irq)” will be executed multiple times (we don’t want it).
> > >
> > > - Inside vkms_crc, the issue is that the returned frame value change for
> > > every call of drm_crtc_accurate_vblank_count() because
> > > in_vblank_irq == false.
>
> Hi Ville,
>
> > OK. So why is it changing? AFAICS it should not change unless the
> > timer was moved forward in between the calls.
>
> Yes Ville, you’re right. We have to update it only when the function
> vkms_vblank_simulate() is invoked (timer move forward), and FWIU we do
> it when we call drm_crtc_handle_vblank(). However, the current
> implementation of vkms, has a call to drm_crtc_accurate_vblank_count()
> inside the vkms_vblank_simulate() which is a problem because it also
> update the vblank value. FWIU, this patch fixes this issue by taking the
> count value in the data struct instead of call
> drm_crtc_accurate_vblank_count() which will avoid the extra update.

But why does that extra update change the vblank count?

--
Ville Syrjälä
Intel

\
 
 \ /
  Last update: 2019-03-11 15:28    [W:1.134 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site