lkml.org 
[lkml]   [2019]   [Mar]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v8 06/15] dt-bindings: sun6i-dsi: Add VCC-DSI supply property
    Date
    Allwinner MIPI DSI controllers are supplied with SoC DSI
    power rails via VCC-DSI pin.

    Some board still work without supplying this but give more
    faith on datasheet and hardware schematics and document this
    supply property in required property list.

    Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
    Reviewed-by: Rob Herring <robh@kernel.org>
    Tested-by: Merlijn Wajer <merlijn@wizzup.org>
    ---
    Documentation/devicetree/bindings/display/sunxi/sun6i-dsi.txt | 1 +
    1 file changed, 1 insertion(+)

    diff --git a/Documentation/devicetree/bindings/display/sunxi/sun6i-dsi.txt b/Documentation/devicetree/bindings/display/sunxi/sun6i-dsi.txt
    index 6a6cf5de08b0..1cc40663b7a2 100644
    --- a/Documentation/devicetree/bindings/display/sunxi/sun6i-dsi.txt
    +++ b/Documentation/devicetree/bindings/display/sunxi/sun6i-dsi.txt
    @@ -21,6 +21,7 @@ Required properties:
    - phys: phandle to the D-PHY
    - phy-names: must be "dphy"
    - resets: phandle to the reset controller driving the encoder
    + - vcc-dsi-supply: the VCC-DSI power supply of the DSI encoder

    - ports: A ports node with endpoint definitions as defined in
    Documentation/devicetree/bindings/media/video-interfaces.txt. The
    --
    2.18.0.321.gffc6fa0e3
    \
     
     \ /
      Last update: 2019-03-11 14:38    [W:4.449 / U:0.004 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site