lkml.org 
[lkml]   [2019]   [Mar]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 038/114] arch: mips: Kconfig: pedantic formatting
    Date
    Formatting of Kconfig files doesn't look so pretty, so let the
    Great White Handkerchief come around and clean it up.

    Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
    ---
    arch/mips/Kconfig | 61 ++++++++++++++++++++--------------------
    arch/mips/bcm47xx/Kconfig | 8 +++---
    arch/mips/bcm63xx/boards/Kconfig | 2 +-
    arch/mips/pic32/Kconfig | 8 +++---
    4 files changed, 39 insertions(+), 40 deletions(-)

    diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
    index 4a5f5b0..de67165 100644
    --- a/arch/mips/Kconfig
    +++ b/arch/mips/Kconfig
    @@ -276,7 +276,7 @@ config BCM47XX
    select BCM47XX_SPROM
    select BCM47XX_SSB if !BCM47XX_BCMA
    help
    - Support for BCM47XX based boards
    + Support for BCM47XX based boards

    config BCM63XX
    bool "Broadcom BCM63XX based boards"
    @@ -295,7 +295,7 @@ config BCM63XX
    select MIPS_L1_CACHE_SHIFT_4
    select CLKDEV_LOOKUP
    help
    - Support for BCM63XX based boards
    + Support for BCM63XX based boards

    config MIPS_COBALT
    bool "Cobalt Server"
    @@ -374,10 +374,10 @@ config MACH_JAZZ
    select SYS_SUPPORTS_64BIT_KERNEL
    select SYS_SUPPORTS_100HZ
    help
    - This a family of machines based on the MIPS R4030 chipset which was
    - used by several vendors to build RISC/os and Windows NT workstations.
    - Members include the Acer PICA, MIPS Magnum 4000, MIPS Millennium and
    - Olivetti M700-10 workstations.
    + This a family of machines based on the MIPS R4030 chipset which was
    + used by several vendors to build RISC/os and Windows NT workstations.
    + Members include the Acer PICA, MIPS Magnum 4000, MIPS Millennium and
    + Olivetti M700-10 workstations.

    config MACH_INGENIC
    bool "Ingenic SoC based machines"
    @@ -573,14 +573,14 @@ config NXP_STB220
    bool "NXP STB220 board"
    select SOC_PNX833X
    help
    - Support for NXP Semiconductors STB220 Development Board.
    + Support for NXP Semiconductors STB220 Development Board.

    config NXP_STB225
    bool "NXP 225 board"
    select SOC_PNX833X
    select SOC_PNX8335
    help
    - Support for NXP Semiconductors STB225 Development Board.
    + Support for NXP Semiconductors STB225 Development Board.

    config PMC_MSP
    bool "PMC-Sierra MSP chipsets"
    @@ -722,9 +722,9 @@ config SGI_IP28
    select SYS_SUPPORTS_64BIT_KERNEL
    select SYS_SUPPORTS_BIG_ENDIAN
    select MIPS_L1_CACHE_SHIFT_7
    - help
    - This is the SGI Indigo2 with R10000 processor. To compile a Linux
    - kernel that runs on these, say Y here.
    + help
    + This is the SGI Indigo2 with R10000 processor. To compile a Linux
    + kernel that runs on these, say Y here.

    config SGI_IP32
    bool "SGI IP32 (O2)"
    @@ -1175,9 +1175,9 @@ config HOLES_IN_ZONE
    config SYS_SUPPORTS_RELOCATABLE
    bool
    help
    - Selected if the platform supports relocating the kernel.
    - The platform must provide plat_get_fdt() if it selects CONFIG_USE_OF
    - to allow access to command line and entropy sources.
    + Selected if the platform supports relocating the kernel.
    + The platform must provide plat_get_fdt() if it selects CONFIG_USE_OF
    + to allow access to command line and entropy sources.

    config MIPS_CBPF_JIT
    def_bool y
    @@ -2120,8 +2120,8 @@ config MIPS_PGD_C0_CONTEXT
    # Set to y for ptrace access to watch registers.
    #
    config HARDWARE_WATCHPOINTS
    - bool
    - default y if CPU_MIPSR1 || CPU_MIPSR2 || CPU_MIPSR6
    + bool
    + default y if CPU_MIPSR1 || CPU_MIPSR2 || CPU_MIPSR6

    menu "Kernel type"

    @@ -2185,10 +2185,10 @@ config PAGE_SIZE_4KB
    bool "4kB"
    depends on !CPU_LOONGSON2 && !CPU_LOONGSON3
    help
    - This option select the standard 4kB Linux page size. On some
    - R3000-family processors this is the only available page size. Using
    - 4kB page size will minimize memory consumption and is therefore
    - recommended for low memory systems.
    + This option select the standard 4kB Linux page size. On some
    + R3000-family processors this is the only available page size. Using
    + 4kB page size will minimize memory consumption and is therefore
    + recommended for low memory systems.

    config PAGE_SIZE_8KB
    bool "8kB"
    @@ -2481,7 +2481,6 @@ config SB1_PASS_2_1_WORKAROUNDS
    depends on CPU_SB1 && CPU_SB1_PASS_2
    default y

    -
    choice
    prompt "SmartMIPS or microMIPS ASE support"

    @@ -2689,16 +2688,16 @@ config RANDOMIZE_BASE
    bool "Randomize the address of the kernel image"
    depends on RELOCATABLE
    ---help---
    - Randomizes the physical and virtual address at which the
    - kernel image is loaded, as a security feature that
    - deters exploit attempts relying on knowledge of the location
    - of kernel internals.
    + Randomizes the physical and virtual address at which the
    + kernel image is loaded, as a security feature that
    + deters exploit attempts relying on knowledge of the location
    + of kernel internals.

    - Entropy is generated using any coprocessor 0 registers available.
    + Entropy is generated using any coprocessor 0 registers available.

    - The kernel will be offset by up to RANDOMIZE_BASE_MAX_OFFSET.
    + The kernel will be offset by up to RANDOMIZE_BASE_MAX_OFFSET.

    - If unsure, say N.
    + If unsure, say N.

    config RANDOMIZE_BASE_MAX_OFFSET
    hex "Maximum kASLR offset" if EXPERT
    @@ -2828,7 +2827,7 @@ choice
    prompt "Timer frequency"
    default HZ_250
    help
    - Allows the configuration of the timer frequency.
    + Allows the configuration of the timer frequency.

    config HZ_24
    bool "24 HZ" if SYS_SUPPORTS_24HZ || SYS_SUPPORTS_ARBIT_HZ
    @@ -3128,10 +3127,10 @@ config ARCH_MMAP_RND_BITS_MAX
    default 15

    config ARCH_MMAP_RND_COMPAT_BITS_MIN
    - default 8
    + default 8

    config ARCH_MMAP_RND_COMPAT_BITS_MAX
    - default 15
    + default 15

    config I8253
    bool
    diff --git a/arch/mips/bcm47xx/Kconfig b/arch/mips/bcm47xx/Kconfig
    index 2947103..6889f74 100644
    --- a/arch/mips/bcm47xx/Kconfig
    +++ b/arch/mips/bcm47xx/Kconfig
    @@ -15,9 +15,9 @@ config BCM47XX_SSB
    select SSB_DRIVER_GPIO
    default y
    help
    - Add support for old Broadcom BCM47xx boards with Sonics Silicon Backplane support.
    + Add support for old Broadcom BCM47xx boards with Sonics Silicon Backplane support.

    - This will generate an image with support for SSB and MIPS32 R1 instruction set.
    + This will generate an image with support for SSB and MIPS32 R1 instruction set.

    config BCM47XX_BCMA
    bool "BCMA Support for Broadcom BCM47XX"
    @@ -31,8 +31,8 @@ config BCM47XX_BCMA
    select BCMA_DRIVER_GPIO
    default y
    help
    - Add support for new Broadcom BCM47xx boards with Broadcom specific Advanced Microcontroller Bus.
    + Add support for new Broadcom BCM47xx boards with Broadcom specific Advanced Microcontroller Bus.

    - This will generate an image with support for BCMA and MIPS32 R2 instruction set.
    + This will generate an image with support for BCMA and MIPS32 R2 instruction set.

    endif
    diff --git a/arch/mips/bcm63xx/boards/Kconfig b/arch/mips/bcm63xx/boards/Kconfig
    index f60d966..492c3bd 100644
    --- a/arch/mips/bcm63xx/boards/Kconfig
    +++ b/arch/mips/bcm63xx/boards/Kconfig
    @@ -5,7 +5,7 @@ choice
    default BOARD_BCM963XX

    config BOARD_BCM963XX
    - bool "Generic Broadcom 963xx boards"
    + bool "Generic Broadcom 963xx boards"
    select SSB

    endchoice
    diff --git a/arch/mips/pic32/Kconfig b/arch/mips/pic32/Kconfig
    index e284e89..7acbb50 100644
    --- a/arch/mips/pic32/Kconfig
    +++ b/arch/mips/pic32/Kconfig
    @@ -39,12 +39,12 @@ choice
    Select the devicetree.

    config DTB_PIC32_NONE
    - bool "None"
    + bool "None"

    config DTB_PIC32_MZDA_SK
    - bool "PIC32MZDA Starter Kit"
    - depends on PIC32MZDA
    - select BUILTIN_DTB
    + bool "PIC32MZDA Starter Kit"
    + depends on PIC32MZDA
    + select BUILTIN_DTB

    endchoice

    --
    1.9.1
    \
     
     \ /
      Last update: 2019-03-11 14:29    [W:7.198 / U:0.068 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site