lkml.org 
[lkml]   [2019]   [Mar]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5/7] gpio: vf610: Use devres to disable clk_gpio
Date
Clk_gpio should be disabled in all error paths in the code that
follws, including the case when either gpiochip_add_data() or
gpiochip_irqchip_add() fail. To simplify things fix this by using
devm_add_action() to disable corresponding clock in case of any erros
as well as driver/device removal.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: linux-gpio@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-imx@nxp.com
---
drivers/gpio/gpio-vf610.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/gpio/gpio-vf610.c b/drivers/gpio/gpio-vf610.c
index 78c1f8ebbe8f..f7445468677d 100644
--- a/drivers/gpio/gpio-vf610.c
+++ b/drivers/gpio/gpio-vf610.c
@@ -289,6 +289,10 @@ static int vf610_gpio_probe(struct platform_device *pdev)
ret = clk_prepare_enable(port->clk_gpio);
if (ret)
return ret;
+ ret = devm_add_action_or_reset(dev, vf610_gpio_disable_clk,
+ port->clk_gpio);
+ if (ret)
+ return ret;
} else if (port->clk_gpio == ERR_PTR(-EPROBE_DEFER)) {
return PTR_ERR(port->clk_gpio);
}
@@ -345,8 +349,6 @@ static int vf610_gpio_remove(struct platform_device *pdev)
struct vf610_gpio_port *port = platform_get_drvdata(pdev);

gpiochip_remove(&port->gc);
- if (!IS_ERR(port->clk_gpio))
- clk_disable_unprepare(port->clk_gpio);

return 0;
}
--
2.20.1
\
 
 \ /
  Last update: 2019-03-11 07:29    [W:0.051 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site