lkml.org 
[lkml]   [2019]   [Mar]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 055/114] drivers: crypto: Kconfig: pedantic formatting
Date
Formatting of Kconfig files doesn't look so pretty, so let the
Great White Handkerchief come around and clean it up.

Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
---
drivers/crypto/Kconfig | 28 ++++++++++++++--------------
drivers/crypto/caam/Kconfig | 18 +++++++++---------
drivers/crypto/ccp/Kconfig | 10 +++++-----
drivers/crypto/chelsio/Kconfig | 30 +++++++++++++++---------------
drivers/crypto/stm32/Kconfig | 6 +++---
drivers/crypto/ux500/Kconfig | 16 ++++++++--------
6 files changed, 54 insertions(+), 54 deletions(-)

diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig
index 0be55fc..ddbfff5 100644
--- a/drivers/crypto/Kconfig
+++ b/drivers/crypto/Kconfig
@@ -18,7 +18,7 @@ config CRYPTO_DEV_PADLOCK
(so called VIA PadLock ACE, Advanced Cryptography Engine)
that provides instructions for very fast cryptographic
operations with supported algorithms.
-
+
The instructions are used only when the CPU supports them.
Otherwise software encryption is used.

@@ -225,15 +225,15 @@ config CRYPTO_DEV_MARVELL_CESA
This driver supports CPU offload through DMA transfers.

config CRYPTO_DEV_NIAGARA2
- tristate "Niagara2 Stream Processing Unit driver"
- select CRYPTO_DES
- select CRYPTO_BLKCIPHER
- select CRYPTO_HASH
- select CRYPTO_MD5
- select CRYPTO_SHA1
- select CRYPTO_SHA256
- depends on SPARC64
- help
+ tristate "Niagara2 Stream Processing Unit driver"
+ select CRYPTO_DES
+ select CRYPTO_BLKCIPHER
+ select CRYPTO_HASH
+ select CRYPTO_MD5
+ select CRYPTO_SHA1
+ select CRYPTO_SHA256
+ depends on SPARC64
+ help
Each core of a Niagara2 processor contains a Stream
Processing Unit, which itself contains several cryptographic
sub-units. One set provides the Modular Arithmetic Unit,
@@ -324,15 +324,15 @@ config HW_RANDOM_PPC4XX
depends on CRYPTO_DEV_PPC4XX && HW_RANDOM
default y
---help---
- This option provides the kernel-side support for the TRNG hardware
- found in the security function of some PowerPC 4xx SoCs.
+ This option provides the kernel-side support for the TRNG hardware
+ found in the security function of some PowerPC 4xx SoCs.

config CRYPTO_DEV_OMAP
tristate "Support for OMAP crypto HW accelerators"
depends on ARCH_OMAP2PLUS
help
OMAP processors have various crypto HW accelerators. Select this if
- you want to use the OMAP modules for any of the crypto algorithms.
+ you want to use the OMAP modules for any of the crypto algorithms.

if CRYPTO_DEV_OMAP

@@ -605,7 +605,7 @@ config CRYPTO_DEV_QCOM_RNG
Generator hardware found on Qualcomm SoCs.

To compile this driver as a module, choose M here. The
- module will be called qcom-rng. If unsure, say N.
+ module will be called qcom-rng. If unsure, say N.

config CRYPTO_DEV_VMX
bool "Support for VMX cryptographic acceleration instructions"
diff --git a/drivers/crypto/caam/Kconfig b/drivers/crypto/caam/Kconfig
index 577c984..b904069 100644
--- a/drivers/crypto/caam/Kconfig
+++ b/drivers/crypto/caam/Kconfig
@@ -129,15 +129,15 @@ config CRYPTO_DEV_FSL_CAAM_AHASH_API
will be called caamhash.

config CRYPTO_DEV_FSL_CAAM_PKC_API
- tristate "Register public key cryptography implementations with Crypto API"
- default y
- select CRYPTO_RSA
- help
- Selecting this will allow SEC Public key support for RSA.
- Supported cryptographic primitives: encryption, decryption,
- signature and verification.
- To compile this as a module, choose M here: the module
- will be called caam_pkc.
+ tristate "Register public key cryptography implementations with Crypto API"
+ default y
+ select CRYPTO_RSA
+ help
+ Selecting this will allow SEC Public key support for RSA.
+ Supported cryptographic primitives: encryption, decryption,
+ signature and verification.
+ To compile this as a module, choose M here: the module
+ will be called caam_pkc.

config CRYPTO_DEV_FSL_CAAM_RNG_API
tristate "Register caam device for hwrng API"
diff --git a/drivers/crypto/ccp/Kconfig b/drivers/crypto/ccp/Kconfig
index b9dfae4..f9272ee 100644
--- a/drivers/crypto/ccp/Kconfig
+++ b/drivers/crypto/ccp/Kconfig
@@ -39,8 +39,8 @@ config CRYPTO_DEV_SP_PSP
default y
depends on CRYPTO_DEV_CCP_DD && X86_64
help
- Provide support for the AMD Platform Security Processor (PSP).
- The PSP is a dedicated processor that provides support for key
- management commands in Secure Encrypted Virtualization (SEV) mode,
- along with software-based Trusted Execution Environment (TEE) to
- enable third-party trusted applications.
+ Provide support for the AMD Platform Security Processor (PSP).
+ The PSP is a dedicated processor that provides support for key
+ management commands in Secure Encrypted Virtualization (SEV) mode,
+ along with software-based Trusted Execution Environment (TEE) to
+ enable third-party trusted applications.
diff --git a/drivers/crypto/chelsio/Kconfig b/drivers/crypto/chelsio/Kconfig
index 930d82d..6f461d13 100644
--- a/drivers/crypto/chelsio/Kconfig
+++ b/drivers/crypto/chelsio/Kconfig
@@ -21,22 +21,22 @@ config CRYPTO_DEV_CHELSIO
will be called chcr.

config CHELSIO_IPSEC_INLINE
- bool "Chelsio IPSec XFRM Tx crypto offload"
- depends on CHELSIO_T4
+ bool "Chelsio IPSec XFRM Tx crypto offload"
+ depends on CHELSIO_T4
depends on CRYPTO_DEV_CHELSIO
- depends on XFRM_OFFLOAD
- depends on INET_ESP_OFFLOAD || INET6_ESP_OFFLOAD
- default n
- ---help---
- Enable support for IPSec Tx Inline.
+ depends on XFRM_OFFLOAD
+ depends on INET_ESP_OFFLOAD || INET6_ESP_OFFLOAD
+ default n
+ ---help---
+ Enable support for IPSec Tx Inline.

config CRYPTO_DEV_CHELSIO_TLS
- tristate "Chelsio Crypto Inline TLS Driver"
- depends on CHELSIO_T4
- depends on TLS
- select CRYPTO_DEV_CHELSIO
- ---help---
- Support Chelsio Inline TLS with Chelsio crypto accelerator.
+ tristate "Chelsio Crypto Inline TLS Driver"
+ depends on CHELSIO_T4
+ depends on TLS
+ select CRYPTO_DEV_CHELSIO
+ ---help---
+ Support Chelsio Inline TLS with Chelsio crypto accelerator.

- To compile this driver as a module, choose M here: the module
- will be called chtls.
+ To compile this driver as a module, choose M here: the module
+ will be called chtls.
diff --git a/drivers/crypto/stm32/Kconfig b/drivers/crypto/stm32/Kconfig
index 63aa78c..1197138 100644
--- a/drivers/crypto/stm32/Kconfig
+++ b/drivers/crypto/stm32/Kconfig
@@ -3,7 +3,7 @@ config CRYPTO_DEV_STM32_CRC
depends on ARCH_STM32
select CRYPTO_HASH
help
- This enables support for the CRC32 hw accelerator which can be found
+ This enables support for the CRC32 hw accelerator which can be found
on STMicroelectronics STM32 SOC.

config CRYPTO_DEV_STM32_HASH
@@ -16,7 +16,7 @@ config CRYPTO_DEV_STM32_HASH
select CRYPTO_SHA256
select CRYPTO_ENGINE
help
- This enables support for the HASH hw accelerator which can be found
+ This enables support for the HASH hw accelerator which can be found
on STMicroelectronics STM32 SOC.

config CRYPTO_DEV_STM32_CRYP
@@ -25,5 +25,5 @@ config CRYPTO_DEV_STM32_CRYP
select CRYPTO_HASH
select CRYPTO_ENGINE
help
- This enables support for the CRYP (AES/DES/TDES) hw accelerator which
+ This enables support for the CRYP (AES/DES/TDES) hw accelerator which
can be found on STMicroelectronics STM32 SOC.
diff --git a/drivers/crypto/ux500/Kconfig b/drivers/crypto/ux500/Kconfig
index 0e338bf..eca3391 100644
--- a/drivers/crypto/ux500/Kconfig
+++ b/drivers/crypto/ux500/Kconfig
@@ -11,18 +11,18 @@ config CRYPTO_DEV_UX500_CRYP
select CRYPTO_BLKCIPHER
select CRYPTO_DES
help
- This selects the crypto driver for the UX500_CRYP hardware. It supports
- AES-ECB, CBC and CTR with keys sizes of 128, 192 and 256 bit sizes.
+ This selects the crypto driver for the UX500_CRYP hardware. It supports
+ AES-ECB, CBC and CTR with keys sizes of 128, 192 and 256 bit sizes.

config CRYPTO_DEV_UX500_HASH
- tristate "UX500 crypto driver for HASH block"
- depends on CRYPTO_DEV_UX500
- select CRYPTO_HASH
+ tristate "UX500 crypto driver for HASH block"
+ depends on CRYPTO_DEV_UX500
+ select CRYPTO_HASH
select CRYPTO_SHA1
select CRYPTO_SHA256
- help
- This selects the hash driver for the UX500_HASH hardware.
- Depends on UX500/STM DMA if running in DMA mode.
+ help
+ This selects the hash driver for the UX500_HASH hardware.
+ Depends on UX500/STM DMA if running in DMA mode.

config CRYPTO_DEV_UX500_DEBUG
bool "Activate ux500 platform debug-mode for crypto and hash block"
--
1.9.1
\
 
 \ /
  Last update: 2019-03-11 14:28    [W:0.521 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site