lkml.org 
[lkml]   [2019]   [Mar]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 079/114] drivers: char: Kconfig: pedantic formatting
Date
Formatting of Kconfig files doesn't look so pretty, so let the
Great White Handkerchief come around and clean it up.

Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
---
drivers/char/Kconfig | 24 +++++-----
drivers/char/agp/Kconfig | 13 +++---
drivers/char/hw_random/Kconfig | 24 +++++-----
drivers/char/ipmi/Kconfig | 99 +++++++++++++++++++++---------------------
4 files changed, 80 insertions(+), 80 deletions(-)

diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 72866a0..ab33583 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -35,18 +35,18 @@ config SGI_SNSC
say Y. Otherwise, say N.

config SGI_TIOCX
- bool "SGI TIO CX driver support"
- depends on (IA64_SGI_SN2 || IA64_GENERIC)
- help
- If you have an SGI Altix and you have fpga devices attached
- to your TIO, say Y here, otherwise say N.
+ bool "SGI TIO CX driver support"
+ depends on (IA64_SGI_SN2 || IA64_GENERIC)
+ help
+ If you have an SGI Altix and you have fpga devices attached
+ to your TIO, say Y here, otherwise say N.

config SGI_MBCS
- tristate "SGI FPGA Core Services driver support"
- depends on SGI_TIOCX
- help
- If you have an SGI Altix with an attached SABrick
- say Y or M here, otherwise say N.
+ tristate "SGI FPGA Core Services driver support"
+ depends on SGI_TIOCX
+ help
+ If you have an SGI Altix with an attached SABrick
+ say Y or M here, otherwise say N.

source "drivers/tty/serial/Kconfig"
source "drivers/tty/serdev/Kconfig"
@@ -461,8 +461,8 @@ config RAW_DRIVER
Once bound, I/O against /dev/raw/rawN uses efficient zero-copy I/O.
See the raw(8) manpage for more details.

- Applications should preferably open the device (eg /dev/hda1)
- with the O_DIRECT flag.
+ Applications should preferably open the device (eg /dev/hda1)
+ with the O_DIRECT flag.

config MAX_RAW_DEVS
int "Maximum number of RAW devices to support (1-65536)"
diff --git a/drivers/char/agp/Kconfig b/drivers/char/agp/Kconfig
index 6231714..6da28d5 100644
--- a/drivers/char/agp/Kconfig
+++ b/drivers/char/agp/Kconfig
@@ -63,7 +63,7 @@ config AGP_AMD64
This option gives you AGP support for the GLX component of
X using the on-CPU northbridge of the AMD Athlon64/Opteron CPUs.
You still need an external AGP bridge like the AMD 8151, VIA
- K8T400M, SiS755. It may also support other AGP bridges when loaded
+ K8T400M, SiS755. It may also support other AGP bridges when loaded
with agp_try_unsupported=1.

config AGP_INTEL
@@ -151,13 +151,12 @@ config AGP_EFFICEON
series processors with integrated northbridges.

config AGP_SGI_TIOCA
- tristate "SGI TIO chipset AGP support"
- depends on AGP && (IA64_SGI_SN2 || IA64_GENERIC)
- help
- This option gives you AGP GART support for the SGI TIO chipset
- for IA64 processors.
+ tristate "SGI TIO chipset AGP support"
+ depends on AGP && (IA64_SGI_SN2 || IA64_GENERIC)
+ help
+ This option gives you AGP GART support for the SGI TIO chipset
+ for IA64 processors.

config INTEL_GTT
tristate
depends on X86 && PCI
-
diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
index 25a7d8f..6265931 100644
--- a/drivers/char/hw_random/Kconfig
+++ b/drivers/char/hw_random/Kconfig
@@ -156,15 +156,15 @@ config HW_RANDOM_OMAP
tristate "OMAP Random Number Generator support"
depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS || ARCH_MVEBU
default HW_RANDOM
- ---help---
- This driver provides kernel-side support for the Random Number
+ ---help---
+ This driver provides kernel-side support for the Random Number
Generator hardware found on OMAP16xx, OMAP2/3/4/5, AM33xx/AM43xx
multimedia processors, and Marvell Armada 7k/8k SoCs.

To compile this driver as a module, choose M here: the
module will be called omap-rng.

- If unsure, say Y.
+ If unsure, say Y.

config HW_RANDOM_OMAP3_ROM
tristate "OMAP3 ROM Random Number Generator support"
@@ -372,17 +372,17 @@ config HW_RANDOM_MESON
If unsure, say Y.

config HW_RANDOM_CAVIUM
- tristate "Cavium ThunderX Random Number Generator support"
- depends on HW_RANDOM && PCI && (ARM64 || (COMPILE_TEST && 64BIT))
- default HW_RANDOM
- ---help---
- This driver provides kernel-side support for the Random Number
- Generator hardware found on Cavium SoCs.
+ tristate "Cavium ThunderX Random Number Generator support"
+ depends on HW_RANDOM && PCI && (ARM64 || (COMPILE_TEST && 64BIT))
+ default HW_RANDOM
+ ---help---
+ This driver provides kernel-side support for the Random Number
+ Generator hardware found on Cavium SoCs.

- To compile this driver as a module, choose M here: the
- module will be called cavium_rng.
+ To compile this driver as a module, choose M here: the
+ module will be called cavium_rng.

- If unsure, say Y.
+ If unsure, say Y.

config HW_RANDOM_MTK
tristate "Mediatek Random Number Generator support"
diff --git a/drivers/char/ipmi/Kconfig b/drivers/char/ipmi/Kconfig
index 94719fc..b6219c3 100644
--- a/drivers/char/ipmi/Kconfig
+++ b/drivers/char/ipmi/Kconfig
@@ -1,40 +1,41 @@
+
#
# IPMI device configuration
#

menuconfig IPMI_HANDLER
- tristate 'IPMI top-level message handler'
- depends on HAS_IOMEM
- select IPMI_DMI_DECODE if DMI
- help
- This enables the central IPMI message handler, required for IPMI
- to work.
+ tristate 'IPMI top-level message handler'
+ depends on HAS_IOMEM
+ select IPMI_DMI_DECODE if DMI
+ help
+ This enables the central IPMI message handler, required for IPMI
+ to work.

- IPMI is a standard for managing sensors (temperature,
- voltage, etc.) in a system.
+ IPMI is a standard for managing sensors (temperature,
+ voltage, etc.) in a system.

- See <file:Documentation/IPMI.txt> for more details on the driver.
+ See <file:Documentation/IPMI.txt> for more details on the driver.

- If unsure, say N.
+ If unsure, say N.

config IPMI_DMI_DECODE
- select IPMI_PLAT_DATA
- bool
+ select IPMI_PLAT_DATA
+ bool

config IPMI_PLAT_DATA
- bool
+ bool

if IPMI_HANDLER

config IPMI_PANIC_EVENT
- bool 'Generate a panic event to all BMCs on a panic'
- help
- When a panic occurs, this will cause the IPMI message handler to,
- by default, generate an IPMI event describing the panic to each
- interface registered with the message handler. This is always
- available, the module parameter for ipmi_msghandler named
- panic_op can be set to "event" to chose this value, this config
- simply causes the default value to be set to "event".
+ bool 'Generate a panic event to all BMCs on a panic'
+ help
+ When a panic occurs, this will cause the IPMI message handler to,
+ by default, generate an IPMI event describing the panic to each
+ interface registered with the message handler. This is always
+ available, the module parameter for ipmi_msghandler named
+ panic_op can be set to "event" to chose this value, this config
+ simply causes the default value to be set to "event".

config IPMI_PANIC_STRING
bool 'Generate OEM events containing the panic string'
@@ -53,43 +54,43 @@ config IPMI_PANIC_STRING
causes the default value to be set to "string".

config IPMI_DEVICE_INTERFACE
- tristate 'Device interface for IPMI'
- help
- This provides an IOCTL interface to the IPMI message handler so
- userland processes may use IPMI. It supports poll() and select().
+ tristate 'Device interface for IPMI'
+ help
+ This provides an IOCTL interface to the IPMI message handler so
+ userland processes may use IPMI. It supports poll() and select().

config IPMI_SI
- tristate 'IPMI System Interface handler'
- select IPMI_PLAT_DATA
- help
- Provides a driver for System Interfaces (KCS, SMIC, BT).
- Currently, only KCS and SMIC are supported. If
- you are using IPMI, you should probably say "y" here.
+ tristate 'IPMI System Interface handler'
+ select IPMI_PLAT_DATA
+ help
+ Provides a driver for System Interfaces (KCS, SMIC, BT).
+ Currently, only KCS and SMIC are supported. If
+ you are using IPMI, you should probably say "y" here.

config IPMI_SSIF
- tristate 'IPMI SMBus handler (SSIF)'
- select I2C
- help
- Provides a driver for a SMBus interface to a BMC, meaning that you
- have a driver that must be accessed over an I2C bus instead of a
- standard interface. This module requires I2C support.
+ tristate 'IPMI SMBus handler (SSIF)'
+ select I2C
+ help
+ Provides a driver for a SMBus interface to a BMC, meaning that you
+ have a driver that must be accessed over an I2C bus instead of a
+ standard interface. This module requires I2C support.

config IPMI_POWERNV
- depends on PPC_POWERNV
- tristate 'POWERNV (OPAL firmware) IPMI interface'
- help
- Provides a driver for OPAL firmware-based IPMI interfaces.
+ depends on PPC_POWERNV
+ tristate 'POWERNV (OPAL firmware) IPMI interface'
+ help
+ Provides a driver for OPAL firmware-based IPMI interfaces.

config IPMI_WATCHDOG
- tristate 'IPMI Watchdog Timer'
- help
- This enables the IPMI watchdog timer.
+ tristate 'IPMI Watchdog Timer'
+ help
+ This enables the IPMI watchdog timer.

config IPMI_POWEROFF
- tristate 'IPMI Poweroff'
- help
- This enables a function to power off the system with IPMI if
- the IPMI management controller is capable of this.
+ tristate 'IPMI Poweroff'
+ help
+ This enables a function to power off the system with IPMI if
+ the IPMI management controller is capable of this.

endif # IPMI_HANDLER

@@ -125,7 +126,7 @@ config NPCM7XX_KCS_IPMI_BMC

config ASPEED_BT_IPMI_BMC
depends on ARCH_ASPEED || COMPILE_TEST
- depends on REGMAP && REGMAP_MMIO && MFD_SYSCON
+ depends on REGMAP && REGMAP_MMIO && MFD_SYSCON
tristate "BT IPMI bmc driver"
help
Provides a driver for the BT (Block Transfer) IPMI interface
--
1.9.1
\
 
 \ /
  Last update: 2019-03-11 14:21    [W:0.433 / U:1.968 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site