Messages in this thread | ![/](/images/icornerl.gif) | | Date | Mon, 11 Mar 2019 12:36:26 +0000 | From | Jonathan Cameron <> | Subject | Re: [PATCH v2 6/7] counter: ftm-quaddec: Documentation: Add specific counter sysfs documentation |
| |
On Thu, 7 Mar 2019 20:42:16 +0900 William Breathitt Gray <vilhelm.gray@gmail.com> wrote:
> On Wed, Mar 06, 2019 at 12:12:07PM +0100, Patrick Havelange wrote: > > This adds documentation for the specific prescaler entry. > > > > Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com> > > --- > > Changes v2 > > - Add doc for prescaler entry > > --- > > .../ABI/testing/sysfs-bus-counter-ftm-quaddec | 16 ++++++++++++++++ > > 1 file changed, 16 insertions(+) > > create mode 100644 Documentation/ABI/testing/sysfs-bus-counter-ftm-quaddec > > > > diff --git a/Documentation/ABI/testing/sysfs-bus-counter-ftm-quaddec b/Documentation/ABI/testing/sysfs-bus-counter-ftm-quaddec > > new file mode 100644 > > index 000000000000..2da629d6d485 > > --- /dev/null > > +++ b/Documentation/ABI/testing/sysfs-bus-counter-ftm-quaddec > > @@ -0,0 +1,16 @@ > > +What: /sys/bus/counter/devices/counterX/countY/prescaler_available > > +KernelVersion: 5.1 > > +Contact: linux-iio@vger.kernel.org > > +Description: > > + Discrete set of available values for the respective Count Y > > + configuration are listed in this file. Values are delimited by > > + newline characters. > > + > > +What: /sys/bus/counter/devices/counterX/countY/prescaler > > +KernelVersion: 5.1 > > +Contact: linux-iio@vger.kernel.org > > +Description: > > + Configure the prescaler value associated with Count Y. > > + On the FlexTimer, the counter clock source passes through a > > + prescaler that is a 7-bit counter. This acts like a clock > > + divider. > > -- > > 2.19.1 > > Hmm, prescalers seem common enough among counter devices to permit these > attributes to be listed in the sysfs-bus-counter documentation file. > However, I'd like to wait until we get another counter driver for a > device with a prescaler before we make that move. From there, we'll have > a better vantage point to determine a fitting standard prescaler > attribute behavior. > > So for now, we'll keep these attributes documented here in the > sysfs-bus-counter-ftm-quaddec file, until the time comes to broach the > discussion again. Agreed. As long as the definition is sufficiently non-specific so it can be moved later. I'm not sure for example that the docs need to say that it is a 7 bit counter. That should be apparent from prescaler_available - or at least possible values should be which is all we need to know.
Jonathan > > William Breathitt Gray
| ![\](/images/icornerr.gif) |