lkml.org 
[lkml]   [2019]   [Mar]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 05/25] dt-bindings: leds: Add function and color properties
From
Date
On 3/10/19 1:28 PM, Jacek Anaszewski wrote:
> Introduce dedicated properties for conveying information about
> LED function and color. Mark old "label" property as deprecated.
>
> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
> Cc: Baolin Wang <baolin.wang@linaro.org>
> Cc: Daniel Mack <daniel@zonque.org>
> Cc: Dan Murphy <dmurphy@ti.com>
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Cc: Oleh Kravchenko <oleg@kaa.org.ua>
> Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
> Cc: Simon Shields <simon@lineageos.org>
> ---
> Documentation/devicetree/bindings/leds/common.txt | 55 +++++++++++++++++++----
> 1 file changed, 47 insertions(+), 8 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/leds/common.txt b/Documentation/devicetree/bindings/leds/common.txt
> index aa1399814a2a..3402b0e1cec9 100644
> --- a/Documentation/devicetree/bindings/leds/common.txt
> +++ b/Documentation/devicetree/bindings/leds/common.txt
> @@ -10,14 +10,23 @@ can influence the way of the LED device initialization, the LED components
> have to be tightly coupled with the LED device binding. They are represented
> by child nodes of the parent LED device binding.
>
> +
> Optional properties for child nodes:
> - led-sources : List of device current outputs the LED is connected to. The
> outputs are identified by the numbers that must be defined
> in the LED device binding documentation.
> +- function: LED functon. Use one of the LED_FUNCTION_* prefixed definitions
> + from the header include/dt-bindings/leds/common.h.
> + If there is no matching LED_FUNCTION available, add a new one.
> +- color : Color of the LED. Use one of the LED_COLOR_NAME_* prefixed definitions
> + from the header include/dt-bindings/leds/common.h.
> + If there is no matching LED_COLOR_NAME available, add a new one.
> +

I am assuming multi color can re-use this property as well?

> - label : The label for this LED. If omitted, the label is taken from the node
> name (excluding the unit address). It has to uniquely identify
> a device, i.e. no other LED class device can be assigned the same
> - label.
> + label. This property is deprecated - use 'function' and 'color'
> + properties instead.
>
> - default-state : The initial state of the LED. Valid values are "on", "off",
> and "keep". If the LED is already on or off and the default-state property is
> @@ -87,29 +96,59 @@ Required properties for trigger source:
>
> * Examples
>
> -gpio-leds {
> +#include <dt-bindings/leds/common.h>
> +
> +led-controller@0 {
> compatible = "gpio-leds";
>
> - system-status {
> - label = "Status";
> + led0 {
> + function = LED_FUNCTION_STATUS;

Missing color for example unless there is a reason to omit it for GPIO LEDs

Also missing reg here

> linux,default-trigger = "heartbeat";
> gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
> };
>
> - usb {
> + led1 {
> + function = LED_FUNCTION_USB;

Same as above
Also missing reg here
> gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
> trigger-sources = <&ohci_port1>, <&ehci_port1>;
> };
> };
>
> -max77693-led {
> +led-controller@0 {
> compatible = "maxim,max77693-led";
>
> - camera-flash {
> - label = "Flash";
> + led {
> + function = LED_FUNCTION_FLASH;
> + color = LED_COLOR_NAME_WHITE;
> led-sources = <0>, <1>;
> led-max-microamp = <50000>;
> flash-max-microamp = <320000>;
> flash-max-timeout-us = <500000>;
> };
> };
> +
> +led-controller@30 {
> + compatible = "panasonic,an30259a";
> + reg = <0x30>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + led@1 {
> + reg = <1>;
> + linux,default-trigger = "heartbeat";
> + function = LED_FUNCTION_INDICATOR;
> + color = LED_COLOR_NAME_RED;
> + };
> +
> + led@2 {
> + reg = <2>;
> + function = LED_FUNCTION_INDICATOR;
> + color = LED_COLOR_NAME_GREEN;
> + };
> +
> + led@3 {
> + reg = <3>;
> + function = LED_FUNCTION_INDICATOR;
> + color = LED_COLOR_NAME_BLUE;
> + };
> +};
>


--
------------------
Dan Murphy

\
 
 \ /
  Last update: 2019-03-11 13:27    [W:0.319 / U:0.684 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site