lkml.org 
[lkml]   [2019]   [Mar]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 3/9] of: irq: add helper to remap interrupts to another irqdomain
From
Date
On 22/02/2019 22:18, Lina Iyer wrote:
> From: Stephen Boyd <swboyd@chromium.org>
>
> Sometimes interrupts are routed from an interrupt controller to another
> in no specific order. Having these in the drives makes it difficult to

s/drives/driver/ ?

> maintain when the same drivers supports multiple variants with different
> mapping. Also, specifying them in DT makes little sense with a
> bunch of numbers like -
> <0, 13>, <5, 32>,
> It makes more sense when we can have the parent handle along with
> interrupt specificers for the incoming interrupt as well as that of the

specifiers

> outgoing interrupt like -
> <22 0 &intc 36 0>,
> <24 0 &intc 37 0>,
> <26 0 &intc 38 0>,
> And the interrupt specifiers can be interpred using these properties -

interpreted

> irqdomain-map-mask = <0xff 0>;
> irqdomain-map-pass-thru = <0 0xff>;

Talking about interpretation, can you please expand on how these should
be used? You definitely want to have this documented as a generic
binding somewhere.

Thanks,

M.
--
Jazz is not dead. It just smells funny...

\
 
 \ /
  Last update: 2019-03-11 11:52    [W:1.392 / U:0.304 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site