Messages in this thread | | | Date | Sun, 10 Mar 2019 09:50:14 +0000 | From | Jonathan Cameron <> | Subject | Re: [PATCH v6 2/4] dt-bindings: iio/temperature: Add doc for thermocouple-type |
| |
On Thu, 7 Mar 2019 11:34:07 +0100 Patrick Havelange <patrick.havelange@essensium.com> wrote:
> This explains the new generic property "thermocouple-type" that > can be used with temperature sensors. > > Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com> I'm happy with this, but want to allow time for Rob and other devicetree types to have a look at it as well.
Give me a poke if this is looking unloved in a week or so.
Thanks,
Jonathan
> --- > Changes v6 > - Add this file > --- > .../bindings/iio/temperature/temperature-bindings.txt | 11 +++++++++++ > 1 file changed, 11 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/temperature/temperature-bindings.txt > > diff --git a/Documentation/devicetree/bindings/iio/temperature/temperature-bindings.txt b/Documentation/devicetree/bindings/iio/temperature/temperature-bindings.txt > new file mode 100644 > index 000000000000..69a6441d8083 > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/temperature/temperature-bindings.txt > @@ -0,0 +1,11 @@ > +If the temperature sensor device can be configured to use some specific > +thermocouple type, you can use the defined types provided in the file > +"include/dt-bindings/iio/temperature/thermocouple.h". > + > +Optional property: > +thermocouple-type: The type of the thermocouple used by the device. > + > +For example: > + device { > + thermocouple-type = <THERMOCOUPLE_TYPE_K> ; > + };
| |