lkml.org 
[lkml]   [2019]   [Mar]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/4] printk: Add ability to set loglevel via "console=" cmdline
Date
This extends the "console=" interface to allow setting the per-console
loglevel by adding "/N" to the string, where N is the desired loglevel
expressed as a base 10 integer. Invalid values are silently ignored.

Signed-off-by: Calvin Owens <calvinowens@fb.com>
---
.../admin-guide/kernel-parameters.txt | 6 ++--
kernel/printk/console_cmdline.h | 1 +
kernel/printk/printk.c | 30 +++++++++++++++----
3 files changed, 28 insertions(+), 9 deletions(-)

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 858b6c0b9a15..afada61dcbce 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -612,10 +612,10 @@
ttyS<n>[,options]
ttyUSB0[,options]
Use the specified serial port. The options are of
- the form "bbbbpnf", where "bbbb" is the baud rate,
+ the form "bbbbpnf/l", where "bbbb" is the baud rate,
"p" is parity ("n", "o", or "e"), "n" is number of
- bits, and "f" is flow control ("r" for RTS or
- omit it). Default is "9600n8".
+ bits, "f" is flow control ("r" for RTS or omit it),
+ and "l" is the loglevel on [0,7]. Default is "9600n8".

See Documentation/admin-guide/serial-console.rst for more
information. See
diff --git a/kernel/printk/console_cmdline.h b/kernel/printk/console_cmdline.h
index 11f19c466af5..fbf9b539366e 100644
--- a/kernel/printk/console_cmdline.h
+++ b/kernel/printk/console_cmdline.h
@@ -6,6 +6,7 @@ struct console_cmdline
{
char name[16]; /* Name of the driver */
int index; /* Minor dev. to use */
+ int loglevel; /* Loglevel to use */
char *options; /* Options for the driver */
#ifdef CONFIG_A11Y_BRAILLE_CONSOLE
char *brl_options; /* Options for braille driver */
diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c
index 6ead14f8c2bc..2e0eb89f046c 100644
--- a/kernel/printk/printk.c
+++ b/kernel/printk/printk.c
@@ -2057,7 +2057,7 @@ asmlinkage __visible void early_printk(const char *fmt, ...)
#endif

static int __add_preferred_console(char *name, int idx, char *options,
- char *brl_options)
+ int loglevel, char *brl_options)
{
struct console_cmdline *c;
int i;
@@ -2083,6 +2083,7 @@ static int __add_preferred_console(char *name, int idx, char *options,
c->options = options;
braille_set_options(c, brl_options);

+ c->loglevel = loglevel;
c->index = idx;
return 0;
}
@@ -2104,8 +2105,8 @@ __setup("console_msg_format=", console_msg_format_setup);
static int __init console_setup(char *str)
{
char buf[sizeof(console_cmdline[0].name) + 4]; /* 4 for "ttyS" */
- char *s, *options, *brl_options = NULL;
- int idx;
+ char *s, *options, *llevel, *brl_options = NULL;
+ int idx, loglevel = LOGLEVEL_EMERG;

if (_braille_console_setup(&str, &brl_options))
return 1;
@@ -2123,6 +2124,14 @@ static int __init console_setup(char *str)
options = strchr(str, ',');
if (options)
*(options++) = 0;
+
+ llevel = strchr(str, '/');
+ if (llevel) {
+ *(llevel++) = 0;
+ if (kstrtoint(llevel, 10, &loglevel))
+ loglevel = LOGLEVEL_EMERG;
+ }
+
#ifdef __sparc__
if (!strcmp(str, "ttya"))
strcpy(buf, "ttyS0");
@@ -2135,7 +2144,7 @@ static int __init console_setup(char *str)
idx = simple_strtoul(s, NULL, 10);
*s = 0;

- __add_preferred_console(buf, idx, options, brl_options);
+ __add_preferred_console(buf, idx, options, loglevel, brl_options);
console_set_on_cmdline = 1;
return 1;
}
@@ -2156,7 +2165,8 @@ __setup("console=", console_setup);
*/
int add_preferred_console(char *name, int idx, char *options)
{
- return __add_preferred_console(name, idx, options, NULL);
+ return __add_preferred_console(name, idx, options, LOGLEVEL_EMERG,
+ NULL);
}

bool console_suspend_enabled = true;
@@ -2574,6 +2584,7 @@ void register_console(struct console *newcon)
struct console *bcon = NULL;
struct console_cmdline *c;
static bool has_preferred;
+ bool cmdline_exists = false;

if (console_drivers)
for_each_console(bcon)
@@ -2640,6 +2651,12 @@ void register_console(struct console *newcon)
if (newcon->index < 0)
newcon->index = c->index;

+ /*
+ * Carry over the loglevel from the cmdline
+ */
+ newcon->level = c->loglevel;
+ cmdline_exists = true;
+
if (_braille_register_console(newcon, c))
return;

@@ -2671,7 +2688,8 @@ void register_console(struct console *newcon)
/*
* By default, the per-console minimum forces no messages through.
*/
- newcon->level = LOGLEVEL_EMERG;
+ if (!cmdline_exists)
+ newcon->level = LOGLEVEL_EMERG;

/*
* Put this console in the list - keep the
--
2.17.1
\
 
 \ /
  Last update: 2019-03-02 01:49    [W:1.287 / U:0.204 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site