lkml.org 
[lkml]   [2019]   [Mar]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 3/3] DRM: Add KMS driver for the Ingenic JZ47xx SoCs
Hi Paul.

Driver looks good and is a very nice piece of work.
In the following a number of minor issues.

One area that jumped at me was framedesc and the use of dma_alloc_coherent()
I hope someone that knows the memory handling better can give some advice here.
To me it looks like something drm should be able to help you with.

Sam

> --- a/drivers/gpu/drm/Makefile
> +++ b/drivers/gpu/drm/Makefile
> @@ -94,6 +94,7 @@ obj-$(CONFIG_DRM_TEGRA) += tegra/
> obj-$(CONFIG_DRM_STM) += stm/
> obj-$(CONFIG_DRM_STI) += sti/
> obj-$(CONFIG_DRM_IMX) += imx/
> +obj-y += ingenic/

To avoid visiting ingenic/ dir for every build use:
obj-$(CONFIG_DRM_INGENIC) += ingennic/

And accept that you need to do this also in ingenic/Makefile

> obj-$(CONFIG_DRM_MEDIATEK) += mediatek/
> obj-$(CONFIG_DRM_MESON) += meson/
> obj-y += i2c/
> +#include <drm/drm_gem_cma_helper.h>
> +#include <drm/drm_fb_cma_helper.h>
> +#include <drm/drm_fb_helper.h>
> +#include <drm/drm_fourcc.h>
> +#include <drm/drm_gem_framebuffer_helper.h>
> +#include <drm/drm_irq.h>
> +#include <drm/drm_panel.h>
> +#include <drm/drm_plane.h>
> +#include <drm/drm_plane_helper.h>
> +#include <drm/drm_probe_helper.h>
> +#include <drm/drm_vblank.h>
> +
> +#include <dt-bindings/display/ingenic,drm.h>
> +
> +#include "../drm_internal.h"
No other drivers needs drm_internal.h - what makes this driver special?
Or do we have something in drm_internal that should be moved to
include/drm/ ?

> +struct ingenic_framedesc {
> + uint32_t next;
> + uint32_t addr;
> + uint32_t id;
> + uint32_t cmd;
> +} __packed;
For internel types u32 is the typical use.
uint32_t is usually used in uapi.

Consider to use dma_addr_t for addresses - we see this in other drivers.
If there are alignemnt constraints then add these.

> +
> +struct jz_soc_info {
> + bool needs_dev_clk;
> +};
> +
> +struct ingenic_drm {
> + struct device *dev;
> + void __iomem *base;
> + struct regmap *map;
> + struct clk *lcd_clk, *pix_clk;
> +
> + u32 lcd_mode;
> +
> + struct ingenic_framedesc *framedesc;
> + dma_addr_t framedesc_phys;
> +
> + struct drm_device *drm;
> + struct drm_plane primary;
> + struct drm_crtc crtc;
> + struct drm_connector connector;
> + struct drm_encoder encoder;
> + struct drm_panel *panel;
> +
> + struct device_node *panel_node;
panel_node is not used outside ingenic_drm_probe() so no need
to have it here.

> +
> + unsigned short ps_start, ps_end, cls_start,
> + cls_end, spl_start, spl_end, rev_start;
I do not see these used, they can all be dropped.

> +};
> +
> +
> +static const struct regmap_config ingenic_drm_regmap_config = {
> + .reg_bits = 32,
> + .val_bits = 32,
> + .reg_stride = 4,
> +
> + .max_register = JZ_REG_LCD_CMD1,
> + .writeable_reg = ingenic_drm_writeable_reg,
> +};

+1 for using regmap.

> +
> +static inline bool ingenic_drm_lcd_is_special_mode(u32 mode)
> +{
> + switch (mode) {
> + case JZ_DRM_LCD_SPECIAL_TFT_1:
> + case JZ_DRM_LCD_SPECIAL_TFT_2:
> + case JZ_DRM_LCD_SPECIAL_TFT_3:
> + return true;
> + default:
> + return false;
> + }
> +}
Does it make sense to support these modes today?
If it is not used in practice then no need to carry it in the driver.


> +
> +static inline bool ingenic_drm_lcd_is_stn_mode(u32 mode)
> +{
> + switch (mode) {
> + case JZ_DRM_LCD_SINGLE_COLOR_STN:
> + case JZ_DRM_LCD_SINGLE_MONOCHROME_STN:
> + case JZ_DRM_LCD_DUAL_COLOR_STN:
> + case JZ_DRM_LCD_DUAL_MONOCHROME_STN:
> + return true;
> + default:
> + return false;
> + }
> +}
This function is not used and can be deleted.
stn display are not really worth it these days anyway.


> +static void ingenic_drm_crtc_atomic_flush(struct drm_crtc *crtc,
> + struct drm_crtc_state *oldstate)
> +{
> + struct ingenic_drm *priv = drm_crtc_get_priv(crtc);
> + struct drm_crtc_state *state = crtc->state;
> + struct drm_pending_vblank_event *event = state->event;
> + struct drm_framebuffer *drm_fb = crtc->primary->state->fb;
> + const struct drm_format_info *finfo;
> + unsigned int width, height;
> +
> + if (drm_atomic_crtc_needs_modeset(state)) {
> + finfo = drm_format_info(drm_fb->format->format);
> + width = state->adjusted_mode.hdisplay;
> + height = state->adjusted_mode.vdisplay;

width and height are unused and can be dropped.

> +
> + ingenic_drm_crtc_update_timings(priv, &state->mode);
> +
> + ingenic_drm_crtc_update_ctrl(priv, finfo->depth);
> + ingenic_drm_crtc_update_cfg(priv, &state->adjusted_mode);
> +
> + clk_set_rate(priv->pix_clk, state->adjusted_mode.clock * 1000);
> +
> + regmap_write(priv->map, JZ_REG_LCD_DA0, priv->framedesc->next);
> + }
> +
> + if (event) {
> + state->event = NULL;
> +
> + spin_lock_irq(&crtc->dev->event_lock);
> + if (drm_crtc_vblank_get(crtc) == 0)
> + drm_crtc_arm_vblank_event(crtc, event);
> + else
> + drm_crtc_send_vblank_event(crtc, event);
> + spin_unlock_irq(&crtc->dev->event_lock);
> + }
> +}
> +
> +static void ingenic_drm_plane_atomic_update(struct drm_plane *plane,
> + struct drm_plane_state *oldstate)
> +{
> + struct ingenic_drm *priv = drm_plane_get_priv(plane);
> + struct drm_plane_state *state = plane->state;
> + const struct drm_format_info *finfo;
> + unsigned int width, height;
> +
> + finfo = drm_format_info(state->fb->format->format);
> + width = state->crtc->state->adjusted_mode.hdisplay;
> + height = state->crtc->state->adjusted_mode.vdisplay;
adjusted_mode->{h,v}display are both ints. So there is a hidden conversion to unsigned int here.
and framedesc->cmd is uint32_t then this is maybe fine.
Noticed so added a comment about it.

> +
> + priv->framedesc->addr = drm_fb_cma_get_gem_addr(state->fb, state, 0);
> +
> + priv->framedesc->cmd = width * height * ((finfo->depth + 7) / 8) / 4;
> + priv->framedesc->cmd |= JZ_LCD_CMD_EOF_IRQ;
> +}
> +
> +static struct drm_driver ingenic_drm_driver_data = {
> + .driver_features = DRIVER_MODESET | DRIVER_GEM | DRIVER_PRIME
> + | DRIVER_ATOMIC | DRIVER_HAVE_IRQ,

DRIVER_HAVE_IRQ are only for legacy drivers these days.
You can drop it.

> + .name = "ingenic-drm",
> + .desc = "DRM module for Ingenic SoCs",
> + .date = "20190228",
> + .major = 1,
> + .minor = 0,
> + .patchlevel = 0,
> +
> + .fops = &ingenic_drm_fops,
> +
> + .dumb_create = drm_gem_cma_dumb_create,
> + .gem_free_object_unlocked = drm_gem_cma_free_object,
> + .gem_vm_ops = &drm_gem_cma_vm_ops,
> +
> + .prime_handle_to_fd = drm_gem_prime_handle_to_fd,
> + .prime_fd_to_handle = drm_gem_prime_fd_to_handle,

> + .gem_prime_import = drm_gem_prime_import,
> + .gem_prime_export = drm_gem_prime_export,
The two assignments above are not needed. This is the default behaviour. See drm_drv.h
(from drm-misc-next)

> +static int ingenic_drm_probe(struct platform_device *pdev)
> +{
> + const struct jz_soc_info *soc_info;
> + struct device *dev = &pdev->dev;
> + struct ingenic_drm *priv;
> + struct clk *parent_clk;
> + struct drm_device *drm;
> + struct resource *mem;
> + void __iomem *base;
> + long parent_rate;
> + int ret, irq;
> +
> + soc_info = device_get_match_data(dev);
> + if (!soc_info)
> + return -EINVAL;
> +
> + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + priv->dev = dev;
> +
> + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + priv->base = base = devm_ioremap_resource(dev, mem);
> + if (IS_ERR(base))
> + return PTR_ERR(base);
> +
> + irq = platform_get_irq(pdev, 0);
> + if (irq < 0) {
> + dev_err(dev, "Failed to get platform irq\n");
> + return -ENOENT;
> + }
> +
> + priv->map = devm_regmap_init_mmio(dev, base,
> + &ingenic_drm_regmap_config);
> + if (IS_ERR(priv->map)) {
> + dev_err(dev, "Failed to create regmap\n");
> + return PTR_ERR(priv->map);
> + }
> +
> + if (soc_info->needs_dev_clk) {
> + priv->lcd_clk = devm_clk_get(dev, "lcd");
> + if (IS_ERR(priv->lcd_clk)) {
> + dev_err(dev, "Failed to get lcd clock\n");
> + return PTR_ERR(priv->lcd_clk);
> + }
> + }
> +
> + priv->pix_clk = devm_clk_get(dev, "lcd_pclk");
> + if (IS_ERR(priv->pix_clk)) {
> + dev_err(dev, "Failed to get pixel clock\n");
> + return PTR_ERR(priv->pix_clk);
> + }
> +
> + priv->panel_node = of_parse_phandle(dev->of_node, "ingenic,panel", 0);
> + if (!priv->panel_node) {
> + DRM_INFO("No panel found");
> + } else {
> + priv->panel = of_drm_find_panel(priv->panel_node);
> + of_node_put(priv->panel_node);
> +
> + if (IS_ERR(priv->panel)) {
> + if (PTR_ERR(priv->panel) == -EPROBE_DEFER)
> + return -EPROBE_DEFER;
> +
> + priv->panel = NULL;
> + } else {
> + ret = drm_panel_prepare(priv->panel);
> + if (ret && ret != -ENOSYS)
> + return ret;
> + }
> + }
> +
> + if (priv->panel) {
> + ret = device_property_read_u32(dev, "ingenic,lcd-mode",
> + &priv->lcd_mode);
> + if (ret) {
> + dev_err(dev, "Unable to read ingenic,lcd-mode property\n");
> + return ret;
> + }
> + }
> +
> + priv->framedesc = dma_alloc_coherent(dev, sizeof(*priv->framedesc),
> + &priv->framedesc_phys, GFP_KERNEL);
> + if (!priv->framedesc)
> + return -ENOMEM;
> +
> + priv->framedesc->next = priv->framedesc_phys;
> + priv->framedesc->id = 0xdeafbead;
I did not really follow this code.
But you have framedesc that include a next pointer which is uint32_t,
and you assign to it framedesc_phys which is dmaaddr_t.
This looks fishy to me, but maybe it is fine.

When browsing other drivers I see uses of for example {dma,dmam}_pool_create()

When lookign at the origianl fbdev code it is obvious where this comes from.
Notice that in the fbdev code JZ_REG_LCD_DA0 register is updated in the enable function.
This is done different in this driver.
Just an observation, what is right I dunno.

> +static int ingenic_drm_remove(struct platform_device *pdev)
> +{
> + struct drm_device *drm = platform_get_drvdata(pdev);
> + struct ingenic_drm *priv = drm->dev_private;
> +
> + drm_dev_unregister(drm);
> + drm_mode_config_cleanup(drm);
> +
> + if (priv->lcd_clk)
> + clk_disable_unprepare(priv->lcd_clk);
> + clk_disable_unprepare(priv->pix_clk);
> +
> + drm_vblank_cleanup(drm);
> + drm_irq_uninstall(drm);
> +
> + drm_encoder_cleanup(&priv->encoder);
> + drm_connector_cleanup(&priv->connector);
> + drm_crtc_cleanup(&priv->crtc);
> + drm_plane_cleanup(&priv->primary);
> +
> + drm_dev_put(drm);
> +
> + dma_free_coherent(&pdev->dev, sizeof(*priv->framedesc),
> + priv->framedesc, priv->framedesc_phys);
> +
> + return 0;
> +}
> +
> +static const struct jz_soc_info jz4740_soc_info = {
> + .needs_dev_clk = true,
> +};
> +
> +static const struct jz_soc_info jz4725b_soc_info = {
> + .needs_dev_clk = false,
> +};
> +
> +static const struct of_device_id ingenic_drm_of_match[] = {
> + { .compatible = "ingenic,jz4740-drm", .data = &jz4740_soc_info },
> + { .compatible = "ingenic,jz4725b-drm", .data = &jz4725b_soc_info },
> + {},
Use /* sentinel */ like in most drivers.

\
 
 \ /
  Last update: 2019-03-01 22:01    [W:0.158 / U:0.232 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site