lkml.org 
[lkml]   [2019]   [Mar]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v4 00/10] Add basic support for Socionext Milbeaut M10V SoC
On Wed, Feb 27, 2019 at 5:51 AM Sugaya Taichi
<sugaya.taichi@socionext.com> wrote:
>
> Hi,
>
> Here is the series of patches the initial support for SC2000(M10V) of
> Milbeaut SoCs. "M10V" is the internal name of SC2000, so commonly used in
> source code.
>
> SC2000 is a SoC of the Milbeaut series. equipped with a DSP optimized for
> computer vision. It also features advanced functionalities such as 360-degree,
> real-time spherical stitching with multi cameras, image stabilization for
> without mechanical gimbals, and rolling shutter correction. More detail is
> below:
> https://www.socionext.com/en/products/assp/milbeaut/SC2000.html
>
> Specifications for developers are below:
> - Quad-core 32bit Cortex-A7 on ARMv7-A architecture
> - NEON support
> - DSP
> - GPU
> - MAX 3GB DDR3
> - Cortex-M0 for power control
> - NAND Flash Interface
> - SD UHS-I
> - SD UHS-II
> - SDIO
> - USB2.0 HOST / Device
> - USB3.0 HOST / Device
> - PCI express Gen2
> - Ethernet Engine
> - I2C
> - UART
> - SPI
> - PWM
>
> Support is quite minimal for now, since it only includes timer, clock,
> pictrl and serial controller drivers, so we can only boot to userspace
> through initramfs. Support for the other peripherals will come eventually.

I've merged these all into the arm/newsoc branch now, with the
exception of the patch that Greg has already taken.

I'll do a little more build testing before that branch will be sent,
but I expect it will be fine.

Arnd

\
 
 \ /
  Last update: 2019-03-01 15:35    [W:0.045 / U:1.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site