lkml.org 
[lkml]   [2019]   [Mar]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] usb: core: make default autosuspend delay configurable
Date
Make the default autosuspend delay configurable at build time.
This is useful for systems that require a non-standard value as
it avoids relying on the command line being properly set.

Signed-off-by: Mans Rullgard <mans@mansr.com>
---
drivers/usb/core/Kconfig | 8 ++++++++
drivers/usb/core/usb.c | 4 ++--
2 files changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig
index 4d75d9a80001..38ed837538c4 100644
--- a/drivers/usb/core/Kconfig
+++ b/drivers/usb/core/Kconfig
@@ -90,3 +90,11 @@ config USB_LEDS_TRIGGER_USBPORT
This driver allows LEDs to be controlled by USB events. Enabling this
trigger allows specifying list of USB ports that should turn on LED
when some USB device gets connected.
+
+config USB_AUTOSUSPEND_DELAY
+ int "Default autosuspend delay"
+ depends on USB
+ default 2
+ help
+ The default autosuspend delay in seconds. Can be overridden
+ with the usbcore.autosuspend command line or module parameter.
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index 4ebfbd737905..52e749386c1c 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -65,8 +65,8 @@ int usb_disabled(void)
EXPORT_SYMBOL_GPL(usb_disabled);

#ifdef CONFIG_PM
-static int usb_autosuspend_delay = 2; /* Default delay value,
- * in seconds */
+/* Default delay value, in seconds */
+static int usb_autosuspend_delay = CONFIG_USB_AUTOSUSPEND_DELAY;
module_param_named(autosuspend, usb_autosuspend_delay, int, 0644);
MODULE_PARM_DESC(autosuspend, "default autosuspend delay");

--
2.20.1
\
 
 \ /
  Last update: 2019-03-01 15:28    [W:0.079 / U:0.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site