lkml.org 
[lkml]   [2019]   [Mar]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subject[PATCH v2 0/4] add MaxBotix I2CXL ultrasonic iio driver
This patch series adds support for I2CXL-MaxSonar ultrasonic distance
sensors of family mb12x2 using the i2c interface of vendor MaxBotix

Implemented and tested functionality:
- reading the distance via in_distance_raw
- buffered mode with trigger
- make use of status gpio to announce completion of ranging


Changes in v2:
Thanks to the review of Andreas and Peter there are a couple of changes:
- rename type wildcard mb12x2 to i2cxl in dt binding
- split changes in vendor list and dt doc into two patches
- merge driver source and Kconfig/Makefile change into one patch
- reword dt documentation
- use directly __be16 datatype to read directly from i2c
- use s16 as return value from mb12x2_read_distance()

Andreas Klinger (4):
dt-bindings: Add vendor prefix for MaxBotix
dt-bindings: maxbotix,i2cxl: Add MaxBotix i2c ultrasonic rangers
mb12x2.c: add distance iio sensor with i2c
MAINTAINERS: add maintainer for maxbotix ultrasonic driver

.../bindings/iio/proximity/maxbotix,i2cxl.txt | 21 ++
.../devicetree/bindings/vendor-prefixes.txt | 1 +
MAINTAINERS | 7 +
drivers/iio/proximity/Kconfig | 11 +
drivers/iio/proximity/Makefile | 1 +
drivers/iio/proximity/mb12x2.c | 283 +++++++++++++++++++++
6 files changed, 324 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/proximity/maxbotix,i2cxl.txt
create mode 100644 drivers/iio/proximity/mb12x2.c

--
2.11.0

\
 
 \ /
  Last update: 2019-03-01 14:43    [W:0.073 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site