lkml.org 
[lkml]   [2019]   [Mar]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH 09/11] dt-bindings: can: rcar_can: Fix RZ/G2 CAN clocks
Date
Hello Marc,

I am sorry to bother you.
Do you think you can take this patch?

Thanks,
Fab

> From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> Sent: 16 January 2019 18:38
> Subject: [PATCH 09/11] dt-bindings: can: rcar_can: Fix RZ/G2 CAN clocks
>
> According to the latest information, the clock options for CAN on RZ/G2
> are the same as the ones available on R-Car Gen3
>
> Fixes: 868b7c0f43e6 ("dt-bindings: can: rcar_can: Add r8a774a1 support")
> Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
> ---
> Documentation/devicetree/bindings/net/can/rcar_can.txt | 12 +++---------
> 1 file changed, 3 insertions(+), 9 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/net/can/rcar_can.txt b/Documentation/devicetree/bindings/net/can/rcar_can.txt
> index 7fcf501..b463e12 100644
> --- a/Documentation/devicetree/bindings/net/can/rcar_can.txt
> +++ b/Documentation/devicetree/bindings/net/can/rcar_can.txt
> @@ -28,13 +28,8 @@ Required properties:
>
> - reg: physical base address and size of the R-Car CAN register map.
> - interrupts: interrupt specifier for the sole interrupt.
> -- clocks: phandles and clock specifiers for 2 CAN clock inputs for RZ/G2
> - devices.
> - phandles and clock specifiers for 3 CAN clock inputs for every other
> - SoC.
> -- clock-names: 2 clock input name strings for RZ/G2: "clkp1", "can_clk".
> - 3 clock input name strings for every other SoC: "clkp1", "clkp2",
> - "can_clk".
> +- clocks: phandles and clock specifiers for 3 CAN clock inputs.
> +- clock-names: 3 clock input name strings: "clkp1", "clkp2", and "can_clk".
> - pinctrl-0: pin control group to be used for this controller.
> - pinctrl-names: must be "default".
>
> @@ -50,8 +45,7 @@ using the below properties:
> Optional properties:
> - renesas,can-clock-select: R-Car CAN Clock Source Select. Valid values are:
> <0x0> (default) : Peripheral clock (clkp1)
> - <0x1> : Peripheral clock (clkp2) (not supported by
> - RZ/G2 devices)
> + <0x1> : Peripheral clock (clkp2)
> <0x3> : External input clock
>
> Example
> --
> 2.7.4

\
 
 \ /
  Last update: 2019-03-01 12:53    [W:0.155 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site