lkml.org 
[lkml]   [2019]   [Mar]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 6/7] drm: atmel-hlcdc: enable sys_clk during initalization.
Date


On 28.02.2019 23:55, Sam Ravnborg wrote:
> Hi Claudiu
>
> On Wed, Feb 27, 2019 at 04:24:40PM +0000, Claudiu.Beznea@microchip.com wrote:
>> From: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
>>
>> For SAM9X60 SoC, sys_clk is through lcd_gclk clock source and this
>> needs to be enabled before enabling lcd_clk.
>
> We have "ownership" of the clocks in the mfd device.
> So it would make more sense to let the mfd device handle
> the base clocks.
> In other words - what about pushing enable of perigh_clk and sys_clk to
> the mfd driver.

I think this could be achieved, but how is better? To have individual
drivers (in this care I would say, child drivers, like e.g. this lcd
driver) taking decisions on their own for their resources (even if shared)
or to have parents taking decisions for them? Just asking.

>
> This may have the nice side-effect that we avoid
> that both the drm driver and the pwm driver enable/disable the periph_clk
> as it is today.
>
> Another comment - fixed_clksrc is used to determine if sys_clk is enabled.
> But that flag is about the clksource selection, and it is just a coincidence
> that the same flag can be used here.

Yes, agree on this, I took advantage of fixed_clksrc to also enable the
sys_clk based on fixed_clksrc to avoid introducing another member in struct
atmel_hlcdc_dc_desc. At this moment this is valid only for SAM9X60 and I
was thinking that in case some other scenario will appear I will do the
appropriate changes.

> Why we cannot always enable sys_clk? Do we need to do this only
> for sam9x60?

Only SAM9X60 requires this explicitly at probe.

> IF yes, then add a new falg. If no, then skip the flag.
>
> Sam
>
>
>>
>> Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
>> [claudiu.beznea@microchip.com: add fixed_clksrc checks]
>> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
>> ---
>> drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c | 19 ++++++++++++++++++-
>> 1 file changed, 18 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c
>> index 0be13eceedba..8bf51f853721 100644
>> --- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c
>> +++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c
>> @@ -625,10 +625,18 @@ static int atmel_hlcdc_dc_load(struct drm_device *dev)
>> dc->hlcdc = dev_get_drvdata(dev->dev->parent);
>> dev->dev_private = dc;
>>
>> + if (dc->desc->fixed_clksrc) {
>> + ret = clk_prepare_enable(dc->hlcdc->sys_clk);
>> + if (ret) {
>> + dev_err(dev->dev, "failed to enable sys_clk\n");
>> + goto err_destroy_wq;
>> + }
>> + }
>> +
>> ret = clk_prepare_enable(dc->hlcdc->periph_clk);
>> if (ret) {
>> dev_err(dev->dev, "failed to enable periph_clk\n");
>> - goto err_destroy_wq;
>> + goto err_sys_clk_disable;
>> }
>>
>> pm_runtime_enable(dev->dev);
>> @@ -664,6 +672,9 @@ static int atmel_hlcdc_dc_load(struct drm_device *dev)
>> err_periph_clk_disable:
>> pm_runtime_disable(dev->dev);
>> clk_disable_unprepare(dc->hlcdc->periph_clk);
>> +err_sys_clk_disable:
>> + if (dc->desc->fixed_clksrc)
>> + clk_disable_unprepare(dc->hlcdc->sys_clk);
>>
>> err_destroy_wq:
>> destroy_workqueue(dc->wq);
>> @@ -688,6 +699,8 @@ static void atmel_hlcdc_dc_unload(struct drm_device *dev)
>>
>> pm_runtime_disable(dev->dev);
>> clk_disable_unprepare(dc->hlcdc->periph_clk);
>> + if (dc->desc->fixed_clksrc)
>> + clk_disable_unprepare(dc->hlcdc->sys_clk);
>> destroy_workqueue(dc->wq);
>> }
>>
>> @@ -805,6 +818,8 @@ static int atmel_hlcdc_dc_drm_suspend(struct device *dev)
>> regmap_read(regmap, ATMEL_HLCDC_IMR, &dc->suspend.imr);
>> regmap_write(regmap, ATMEL_HLCDC_IDR, dc->suspend.imr);
>> clk_disable_unprepare(dc->hlcdc->periph_clk);
>> + if (dc->desc->fixed_clksrc)
>> + clk_disable_unprepare(dc->hlcdc->sys_clk);
>>
>> return 0;
>> }
>> @@ -814,6 +829,8 @@ static int atmel_hlcdc_dc_drm_resume(struct device *dev)
>> struct drm_device *drm_dev = dev_get_drvdata(dev);
>> struct atmel_hlcdc_dc *dc = drm_dev->dev_private;
>>
>> + if (dc->desc->fixed_clksrc)
>> + clk_prepare_enable(dc->hlcdc->sys_clk);
>> clk_prepare_enable(dc->hlcdc->periph_clk);
>> regmap_write(dc->hlcdc->regmap, ATMEL_HLCDC_IER, dc->suspend.imr);
>>
>> --
>> 2.7.4
>>
>> _______________________________________________
>> dri-devel mailing list
>> dri-devel@lists.freedesktop.org
>> https://lists.freedesktop.org/mailman/listinfo/dri-devel
>
\
 
 \ /
  Last update: 2019-03-01 11:08    [W:0.066 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site