lkml.org 
[lkml]   [2019]   [Feb]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 0/2] cpufreq/opp: rework regulator initialization
On Fri, Feb 8, 2019 at 9:55 AM Viresh Kumar <viresh.kumar@linaro.org> wrote:
>
> On 08-02-19, 09:12, Marek Szyprowski wrote:
> > On 2019-02-08 07:49, Viresh Kumar wrote:
> > > Why don't you get similar problem during suspend? I think you can get
> > > it when the CPUs are offlined as I2C would have gone by then. The
> > > cpufreq or OPP core can try and run some regulator or genpd or clk
> > > calls to disable resources, etc. Even if doesn't happen, it certainly
> > > can.
> >
> > CPUfreq is suspended very early during system suspend and thus it does
> > nothing when CPUs are being offlined.
>
> > > Also at resume the cpufreq core may try to change the frequency right
> > > from ->init() on certain cases, though not everytime and so the
> > > problem can come despite of this series.
> >
> > cpufreq is still in suspended state (it is being 'resume' very late in
> > the system resume procedure), so if driver doesn't explicitly change any
> > opp in ->init(), then cpufreq core waits until everything is resumed. To
> > sum up, this seems to be fine, beside the issue with regulator
> > initialization I've addressed in this patchset.
>
> Yeah, the governors are suspended very soon, but any frequency change
> starting from cpufreq core can still happen. There are at least two
> points in cpufreq_online() where we may end up changing the frequency,
> but that is conditional and may not be getting hit.
>
> > > We guarantee that the resources are available during probe but not
> > > during resume, that's where the problem is.
> >
> > Yes, so I've changed cpufreq-dt to the common approach, in which the
> > driver keeps all needed resources for the whole lifetime of the device.
>
> That's not what I was saying actually. I was saying that it should be
> fine to do a I2C transfer during resume,

Surely not before resuming the I2C controller involved?

> else we will always have
> problems and have to fix them with hacks like the one you proposed
> where you acquire resources for all the possible CPUs. Maybe we can
> fix it once and for all.

Obviously, all I2C transfers need to take place either before
suspending the I2C controller or after resuming it.

\
 
 \ /
  Last update: 2019-02-08 11:19    [W:0.111 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site