lkml.org 
[lkml]   [2019]   [Feb]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/5] genirq/affinity: allow driver to setup managed IRQ's affinity
On Fri, Jan 25, 2019 at 05:53:44PM +0800, Ming Lei wrote:
> This patch introduces callback of .setup_affinity into 'struct
> irq_affinity', so that:
>
> 1) allow drivers to customize the affinity for managed IRQ, for
> example, now NVMe has special requirement for read queues & poll
> queues
>
> 2) 6da4b3ab9a6e9 ("genirq/affinity: Add support for allocating interrupt sets")
> makes pci_alloc_irq_vectors_affinity() a bit difficult to use for
> allocating interrupt sets: 'max_vecs' is required to same with 'min_vecs'.

s/is required to same with/is required to be equal to/

> With this patch, driver can implement their own .setup_affinity to
> customize the affinity, then the above thing can be solved easily.

s/driver/drivers/

> Signed-off-by: Ming Lei <ming.lei@redhat.com>
> ---
> include/linux/interrupt.h | 26 +++++++++++++++++---------
> kernel/irq/affinity.c | 6 ++++++
> 2 files changed, 23 insertions(+), 9 deletions(-)
>
> diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h
> index c672f34235e7..f6cea778cf50 100644
> --- a/include/linux/interrupt.h
> +++ b/include/linux/interrupt.h
> @@ -242,30 +242,38 @@ struct irq_affinity_notify {
> };
>
> /**
> + * struct irq_affinity_desc - Interrupt affinity descriptor
> + * @mask: cpumask to hold the affinity assignment
> + */
> +struct irq_affinity_desc {
> + struct cpumask mask;
> + unsigned int is_managed : 1;
> +};

I was going to comment that "managed" already has a common usage
related to the devm_*() functions, but I don't think that's what you
mean here. But then I noticed that you're only *moving* this code,
so you couldn't change it anyway.

But I still wonder what "managed" means here.

> +
> +/**
> * struct irq_affinity - Description for automatic irq affinity assignements
> * @pre_vectors: Don't apply affinity to @pre_vectors at beginning of
> * the MSI(-X) vector space
> * @post_vectors: Don't apply affinity to @post_vectors at end of
> * the MSI(-X) vector space
> + * @setup_affinity: Use driver's method to setup irq vectors affinity,
> + * and driver has to handle pre_vectors & post_vectors
> + * correctly, set 'is_managed' flag correct too

s/irq vectors/irq vector/
s/correct/correctly/

In general I don't think "correctly" is very useful in changelogs
and comments. Usually it just means "how *I* think it should be
done", but it doesn't tell anybody else exactly *how* it should be
done.

What does it mean for a driver to handle pre_vectors & post_vectors
"correctly"? The driver's .setup_affinity() method receives an array
of struct irq_affinity; maybe it means that method should set the
cpumask for each element as it desires. For @pre_vectors and
@post_vectors, I suppose that means their cpumask would be
irq_default_affinity?

But I guess the .setup_affinity() method means the driver would have
complete flexibility for each vector, and it could use
irq_default_affinity for arbitrary vectors, not just the first few
(@pre_vectors) and the last few (@post_vectors)?

What's the rule for how a driver sets "is_managed"?

> + * @priv: Private data of @setup_affinity
> * @nr_sets: Length of passed in *sets array
> * @sets: Number of affinitized sets
> */
> struct irq_affinity {
> int pre_vectors;
> int post_vectors;
> + int (*setup_affinity)(const struct irq_affinity *,
> + struct irq_affinity_desc *,
> + unsigned int);
> + void *priv;
> int nr_sets;
> int *sets;
> };
>
> -/**
> - * struct irq_affinity_desc - Interrupt affinity descriptor
> - * @mask: cpumask to hold the affinity assignment
> - */
> -struct irq_affinity_desc {
> - struct cpumask mask;
> - unsigned int is_managed : 1;
> -};
> -
> #if defined(CONFIG_SMP)
>
> extern cpumask_var_t irq_default_affinity;
> diff --git a/kernel/irq/affinity.c b/kernel/irq/affinity.c
> index 118b66d64a53..7b77cbdf739c 100644
> --- a/kernel/irq/affinity.c
> +++ b/kernel/irq/affinity.c
> @@ -257,6 +257,12 @@ irq_create_affinity_masks(int nvecs, const struct irq_affinity *affd)
> if (!masks)
> return NULL;
>
> + if (affd->setup_affinity) {
> + if (affd->setup_affinity(affd, masks, nvecs))
> + return NULL;
> + return masks;
> + }

> /* Fill out vectors at the beginning that don't need affinity */
> for (curvec = 0; curvec < affd->pre_vectors; curvec++)
> cpumask_copy(&masks[curvec].mask, irq_default_affinity);
> --
> 2.9.5
>

\
 
 \ /
  Last update: 2019-02-07 23:22    [W:0.134 / U:0.396 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site