lkml.org 
[lkml]   [2019]   [Feb]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] spi: bcm-qspi: when tx/rx buffer is NULL set to 0
Date
From: Justin Chen <justinpopo6@gmail.com>

Currently we set the tx/rx buffer to 0xff when NULL. This causes
problems with some spi slaves where 0xff is a valid command. Looking
at other drivers, the tx/rx buffer is usually set to 0x00 when NULL.
Following this convention solves the issue.

Fixes: fa236a7ef240 ("spi: bcm-qspi: Add Broadcom MSPI driver")
Signed-off-by: Justin Chen <justinpopo6@gmail.com>
---
drivers/spi/spi-bcm-qspi.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/spi/spi-bcm-qspi.c b/drivers/spi/spi-bcm-qspi.c
index 584bcb0..79456aa 100644
--- a/drivers/spi/spi-bcm-qspi.c
+++ b/drivers/spi/spi-bcm-qspi.c
@@ -681,7 +681,7 @@ static void read_from_hw(struct bcm_qspi *qspi, int slots)
if (buf)
buf[tp.byte] = read_rxram_slot_u8(qspi, slot);
dev_dbg(&qspi->pdev->dev, "RD %02x\n",
- buf ? buf[tp.byte] : 0xff);
+ buf ? buf[tp.byte] : 0x00);
} else {
u16 *buf = tp.trans->rx_buf;

@@ -689,7 +689,7 @@ static void read_from_hw(struct bcm_qspi *qspi, int slots)
buf[tp.byte / 2] = read_rxram_slot_u16(qspi,
slot);
dev_dbg(&qspi->pdev->dev, "RD %04x\n",
- buf ? buf[tp.byte] : 0xffff);
+ buf ? buf[tp.byte] : 0x0000);
}

update_qspi_trans_byte_count(qspi, &tp,
@@ -744,13 +744,13 @@ static int write_to_hw(struct bcm_qspi *qspi, struct spi_device *spi)
while (!tstatus && slot < MSPI_NUM_CDRAM) {
if (tp.trans->bits_per_word <= 8) {
const u8 *buf = tp.trans->tx_buf;
- u8 val = buf ? buf[tp.byte] : 0xff;
+ u8 val = buf ? buf[tp.byte] : 0x00;

write_txram_slot_u8(qspi, slot, val);
dev_dbg(&qspi->pdev->dev, "WR %02x\n", val);
} else {
const u16 *buf = tp.trans->tx_buf;
- u16 val = buf ? buf[tp.byte / 2] : 0xffff;
+ u16 val = buf ? buf[tp.byte / 2] : 0x0000;

write_txram_slot_u16(qspi, slot, val);
dev_dbg(&qspi->pdev->dev, "WR %04x\n", val);
--
2.7.4
\
 
 \ /
  Last update: 2019-02-07 21:48    [W:0.044 / U:0.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site