lkml.org 
[lkml]   [2019]   [Feb]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] x86: pcengines apuv2 gpio/leds/keys platform driver
Date
Driver for PCengines APUv2 board that supports GPIOs via AMD PCH
and attached LEDs and keys.

Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
---
MAINTAINERS | 5 +
drivers/platform/x86/Kconfig | 9 ++
drivers/platform/x86/Makefile | 1 +
drivers/platform/x86/pcengines-apuv2.c | 263 +++++++++++++++++++++++++++++++++
4 files changed, 278 insertions(+)
create mode 100644 drivers/platform/x86/pcengines-apuv2.c

diff --git a/MAINTAINERS b/MAINTAINERS
index a693f39..2bdc975 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11515,6 +11515,11 @@ F: lib/parman.c
F: lib/test_parman.c
F: include/linux/parman.h

+PC ENGINES APU BOARD DRIVER
+M: Enrico Weigelt, metux IT consult <info@metux.net>
+S: Maintained
+F: drivers/platform/x86/pcengines-apuv2.c
+
PC87360 HARDWARE MONITORING DRIVER
M: Jim Cromie <jim.cromie@gmail.com>
L: linux-hwmon@vger.kernel.org
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index b5e9db8..e424643 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -1303,6 +1303,15 @@ config HUAWEI_WMI
To compile this driver as a module, choose M here: the module
will be called huawei-wmi.

+config PCENGINES_APU2
+ tristate "LEDs and buttons driver forPC Engines APUv2 board"
+ depends on GPIO_AMD_FCH
+ depends on KEYBOARD_GPIO
+ depends on KEYBOARD_GPIO_POLLED
+ depends on LEDS_GPIO
+ ---help---
+ This options adds APUv2 board support for LEDs and keys
+
endif # X86_PLATFORM_DEVICES

config PMC_ATOM
diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
index ce8da26..86cb766 100644
--- a/drivers/platform/x86/Makefile
+++ b/drivers/platform/x86/Makefile
@@ -96,3 +96,4 @@ obj-$(CONFIG_INTEL_TURBO_MAX_3) += intel_turbo_max_3.o
obj-$(CONFIG_INTEL_CHTDC_TI_PWRBTN) += intel_chtdc_ti_pwrbtn.o
obj-$(CONFIG_I2C_MULTI_INSTANTIATE) += i2c-multi-instantiate.o
obj-$(CONFIG_INTEL_ATOMISP2_PM) += intel_atomisp2_pm.o
+obj-$(CONFIG_PCENGINES_APU2) += pcengines-apuv2.o
diff --git a/drivers/platform/x86/pcengines-apuv2.c b/drivers/platform/x86/pcengines-apuv2.c
new file mode 100644
index 0000000..9bb89d6
--- /dev/null
+++ b/drivers/platform/x86/pcengines-apuv2.c
@@ -0,0 +1,263 @@
+/*
+ * PC-Engines APUv2 board platform driver for gpio buttons and LEDs
+ *
+ * Copyright (C) 2018 metux IT consult
+ * Author: Enrico Weigelt <info@metux.net>
+ */
+
+// SPDX-License-Identifier: GPL+
+
+#include <linux/dmi.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/platform_data/x86/amd-fch-gpio-pdata.h>
+
+/* TODO
+ * support apu1 board (different fch, different register layouts
+ * add spinlocks
+*/
+
+#define FCH_ACPI_MMIO_BASE 0xFED80000
+#define FCH_GPIO_OFFSET 0x1500
+#define FCH_GPIO_SIZE 0x300
+
+#define GPIO_BASE 100
+
+#define GPIO_LED1 (GPIO_BASE+0)
+#define GPIO_LED2 (GPIO_BASE+1)
+#define GPIO_LED3 (GPIO_BASE+2)
+#define GPIO_MODESW (GPIO_BASE+3)
+#define GPIO_SIMSWAP (GPIO_BASE+4)
+
+struct board_data {
+ const char *name;
+ struct resource res;
+ int gpio_num;
+ int gpio_base;
+ struct amd_fch_gpio_reg *gpio_regs;
+};
+
+static const struct gpio_led apu2_leds[] /* __initconst */ = {
+ { .name = "apu:green:1", .gpio = GPIO_LED1, .active_low = 1, },
+ { .name = "apu:green:2", .gpio = GPIO_LED2, .active_low = 1, },
+ { .name = "apu:green:3", .gpio = GPIO_LED3, .active_low = 1, }
+};
+
+static const struct gpio_led_platform_data apu2_leds_pdata /* __initconst */ = {
+ .num_leds = ARRAY_SIZE(apu2_leds),
+ .leds = apu2_leds,
+};
+
+static struct amd_fch_gpio_reg apu2_gpio_regs[] = {
+ { 0x44 }, // GPIO_57 -- LED1
+ { 0x45 }, // GPIO_58 -- LED2
+ { 0x46 }, // GPIO_59 -- LED3
+ { 0x59 }, // GPIO_32 -- LED4 -- GE32 -- #modesw
+ { 0x5A }, // GPIO_33 -- LED5 -- GE33 -- simswap
+ { 0x42 }, // GPIO_51 -- LED6
+ { 0x43 }, // GPIO_55 -- LED7
+ { 0x47 }, // GPIO_64 -- LED8
+ { 0x48 }, // GPIO_68 -- LED9
+ { 0x4C }, // GPIO_70 -- LED10
+};
+
+static struct gpio_keys_button apu2_keys_buttons[] = {
+ {
+ .code = KEY_A,
+ .gpio = GPIO_MODESW,
+ .active_low = 1,
+ .desc = "modeswitch",
+ .type = EV_KEY, /* or EV_SW ? */
+ .debounce_interval = 10,
+ .value = 1,
+ }
+};
+
+static const struct gpio_keys_platform_data apu2_keys_pdata = {
+ .buttons = apu2_keys_buttons,
+ .nbuttons = ARRAY_SIZE(apu2_keys_buttons),
+ .poll_interval = 100,
+ .rep = 0,
+ .name = "apu2-keys",
+};
+
+static const struct amd_fch_gpio_pdata board_apu2 = {
+ .res = DEFINE_RES_MEM_NAMED(FCH_ACPI_MMIO_BASE + FCH_GPIO_OFFSET,
+ FCH_GPIO_SIZE,
+ "apu2-gpio-iomem"),
+ .gpio_num = ARRAY_SIZE(apu2_gpio_regs),
+ .gpio_reg = apu2_gpio_regs,
+ .gpio_base = GPIO_BASE,
+};
+
+/* note: matching works on string prefix, so "apu2" must come before "apu" */
+static const struct dmi_system_id apu_gpio_dmi_table[] __initconst = {
+
+ /* APU2 w/ legacy bios < 4.0.8 */
+ {
+ .ident = "apu2",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "PC Engines"),
+ DMI_MATCH(DMI_BOARD_NAME, "APU2")
+ },
+ .driver_data = (void*)&board_apu2,
+ },
+ /* APU2 w/ legacy bios >= 4.0.8 */
+ {
+ .ident = "apu2",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "PC Engines"),
+ DMI_MATCH(DMI_BOARD_NAME, "apu2")
+ },
+ .driver_data = (void*)&board_apu2,
+ },
+ /* APU2 w/ maainline bios */
+ {
+ .ident = "apu2",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "PC Engines"),
+ DMI_MATCH(DMI_BOARD_NAME, "PC Engines apu2")
+ },
+ .driver_data = (void*)&board_apu2,
+ },
+
+ /* APU3 w/ legacy bios < 4.0.8 */
+ {
+ .ident = "apu3",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "PC Engines"),
+ DMI_MATCH(DMI_BOARD_NAME, "APU3")
+ },
+ .driver_data = (void*)&board_apu2,
+ },
+ /* APU3 w/ legacy bios >= 4.0.8 */
+ {
+ .ident = "apu3",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "PC Engines"),
+ DMI_MATCH(DMI_BOARD_NAME, "apu3")
+ },
+ .driver_data = (void*)&board_apu2,
+ },
+ /* APU3 w/ mainline bios */
+ {
+ .ident = "apu3",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "PC Engines"),
+ DMI_MATCH(DMI_BOARD_NAME, "PC Engines apu3")
+ },
+ .driver_data = (void*)&board_apu2,
+ },
+
+ /* APU1 */
+ /* not supported yet - the register set is pretty different
+ {
+ .ident = "apu",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "PC Engines"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "APU")
+ },
+ .driver_data = (void*)&board_apu1,
+ },
+ */
+ {}
+};
+
+static struct platform_device *apu_gpio_pdev = NULL;
+static struct platform_device *apu_leds_pdev = NULL;
+static struct platform_device *apu_keys_pdev = NULL;
+
+static int __init apu_gpio_init(void)
+{
+ int rc;
+ const struct dmi_system_id *dmi = dmi_first_match(apu_gpio_dmi_table);
+
+ if (!dmi) {
+ pr_err(KBUILD_MODNAME ": failed to detect apu board via dmi\n");
+ return -ENODEV;
+ }
+
+ pr_info(KBUILD_MODNAME ": registering gpio\n");
+ if (IS_ERR(apu_gpio_pdev = platform_device_register_resndata(
+ NULL, /* parent */
+ AMD_FCH_GPIO_DRIVER_NAME, /* name */
+ -1, /* id */
+ NULL, /* res */
+ 0, /* res_num */
+ dmi->driver_data, /* platform_data */
+ sizeof(struct amd_fch_gpio_pdata)))) {
+ pr_err(KBUILD_MODNAME ": failed registering gpio device\n");
+ rc = PTR_ERR(apu_gpio_pdev);
+ goto fail;
+ }
+
+ pr_info(KBUILD_MODNAME ": registering leds\n");
+ if (IS_ERR(apu_leds_pdev = platform_device_register_resndata(
+ NULL, /* parent */
+ "leds-gpio", /* driver name */
+ -1, /* id */
+ NULL, /* res */
+ 0, /* ren_num */
+ &apu2_leds_pdata, /* platform data */
+ sizeof(apu2_leds_pdata)))) {
+ pr_err(KBUILD_MODNAME ": failed registering leds device\n");
+ rc = PTR_ERR(apu_leds_pdev);
+ goto fail;
+ }
+
+ pr_info(KBUILD_MODNAME ": registering keys\n");
+ if (IS_ERR(apu_keys_pdev = platform_device_register_resndata(
+ NULL, /* parent */
+ "gpio-keys-polled", /* driver name */
+ -1, /* id */
+ NULL, /* res */
+ 0, /* res_num */
+ &apu2_keys_pdata, /* platform_data */
+ sizeof(apu2_keys_pdata)))) {
+ pr_err(KBUILD_MODNAME ": failed registering keys device\n");
+ rc = PTR_ERR(apu_keys_pdev);
+ goto fail;
+ }
+
+ pr_info(KBUILD_MODNAME ": initialized: gpio, leds, keys\n");
+ return 0;
+
+fail:
+ if (!IS_ERR(apu_keys_pdev))
+ platform_device_unregister(apu_keys_pdev);
+ if (!IS_ERR(apu_leds_pdev))
+ platform_device_unregister(apu_leds_pdev);
+ if (!IS_ERR(apu_gpio_pdev))
+ platform_device_unregister(apu_gpio_pdev);
+
+ pr_err(KBUILD_MODNAME ": probe FAILED: %d\n", rc);
+ return rc;
+}
+
+static void __exit apu_gpio_exit(void)
+{
+ if (!IS_ERR(apu_keys_pdev))
+ platform_device_unregister(apu_keys_pdev);
+ if (!IS_ERR(apu_leds_pdev))
+ platform_device_unregister(apu_leds_pdev);
+ if (!IS_ERR(apu_gpio_pdev))
+ platform_device_unregister(apu_gpio_pdev);
+}
+
+module_init(apu_gpio_init);
+module_exit(apu_gpio_exit);
+
+MODULE_AUTHOR("Enrico Weigelt, metux IT consult <info@metux.net>");
+MODULE_DESCRIPTION("PC Engines APUv2 board GPIO/LED/keys driver");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(dmi, apu_gpio_dmi_table);
+MODULE_ALIAS("platform:apu-board");
+MODULE_SOFTDEP("pre: gpio_amd_fch");
+MODULE_SOFTDEP("pre: gpio_keys");
+MODULE_SOFTDEP("pre: gpio_keys_polled");
--
1.9.1
\
 
 \ /
  Last update: 2019-02-07 18:14    [W:0.052 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site