lkml.org 
[lkml]   [2019]   [Feb]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next v2 01/10] net: phy: Update PHY linkmodes after config_init
Date
We want to be able to update a PHY's supported list in the config_init
callback, so move the Pause parameters settings from phydrv->features
after calling config_init to make sure these parameters aren't
overwritten.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
---
drivers/net/phy/phy_device.c | 89 +++++++++++++++++++++++-------------
1 file changed, 58 insertions(+), 31 deletions(-)

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 891e0178b97f..18a10565efd4 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -1059,6 +1059,59 @@ static int phy_poll_reset(struct phy_device *phydev)
return 0;
}

+/**
+ * phy_update_linkmodes - Update and sanitize linkmodes and pause parameters
+ * @phydev: The PHY device whose parameters we want to update.
+ *
+ * Description: The list of supported and advertised linkmodes is not
+ * straightforward to maintain, since PHYs and MACs are subject to quirks and
+ * erratas. This function re-builds the list of the supported pause parameters
+ * by taking into account the parameters expressed in the driver's features
+ * list.
+ */
+static void phy_update_linkmodes(struct phy_device *phydev)
+{
+ struct device_driver *drv = phydev->mdio.dev.driver;
+ struct phy_driver *phydrv = to_phy_driver(drv);
+
+ mutex_lock(&phydev->lock);
+
+ /* The Pause Frame bits indicate that the PHY can support passing
+ * pause frames. During autonegotiation, the PHYs will determine if
+ * they should allow pause frames to pass. The MAC driver should then
+ * use that result to determine whether to enable flow control via
+ * pause frames.
+ *
+ * Normally, PHY drivers should not set the Pause bits, and instead
+ * allow phylib to do that. However, there may be some situations
+ * (e.g. hardware erratum) where the driver wants to set only one
+ * of these bits.
+ */
+ if (test_bit(ETHTOOL_LINK_MODE_Pause_BIT, phydrv->features) ||
+ test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, phydrv->features)) {
+ linkmode_clear_bit(ETHTOOL_LINK_MODE_Pause_BIT,
+ phydev->supported);
+ linkmode_clear_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
+ phydev->supported);
+ if (test_bit(ETHTOOL_LINK_MODE_Pause_BIT, phydrv->features))
+ linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT,
+ phydev->supported);
+ if (test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
+ phydrv->features))
+ linkmode_set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
+ phydev->supported);
+ } else {
+ linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT,
+ phydev->supported);
+ linkmode_set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
+ phydev->supported);
+ }
+
+ linkmode_copy(phydev->advertising, phydev->supported);
+
+ mutex_unlock(&phydev->lock);
+}
+
int phy_init_hw(struct phy_device *phydev)
{
int ret = 0;
@@ -1082,6 +1135,11 @@ int phy_init_hw(struct phy_device *phydev)
if (phydev->drv->config_init)
ret = phydev->drv->config_init(phydev);

+ /* Update and sanitize the supported and advertised linkmodes, since
+ * they might have been changed in config_init
+ */
+ phy_update_linkmodes(phydev);
+
return ret;
}
EXPORT_SYMBOL(phy_init_hw);
@@ -2221,37 +2279,6 @@ static int phy_probe(struct device *dev)
*/
of_set_phy_eee_broken(phydev);

- /* The Pause Frame bits indicate that the PHY can support passing
- * pause frames. During autonegotiation, the PHYs will determine if
- * they should allow pause frames to pass. The MAC driver should then
- * use that result to determine whether to enable flow control via
- * pause frames.
- *
- * Normally, PHY drivers should not set the Pause bits, and instead
- * allow phylib to do that. However, there may be some situations
- * (e.g. hardware erratum) where the driver wants to set only one
- * of these bits.
- */
- if (test_bit(ETHTOOL_LINK_MODE_Pause_BIT, phydrv->features) ||
- test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, phydrv->features)) {
- linkmode_clear_bit(ETHTOOL_LINK_MODE_Pause_BIT,
- phydev->supported);
- linkmode_clear_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
- phydev->supported);
- if (test_bit(ETHTOOL_LINK_MODE_Pause_BIT, phydrv->features))
- linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT,
- phydev->supported);
- if (test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
- phydrv->features))
- linkmode_set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
- phydev->supported);
- } else {
- linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT,
- phydev->supported);
- linkmode_set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
- phydev->supported);
- }
-
/* Set the state to READY by default */
phydev->state = PHY_READY;

--
2.19.2
\
 
 \ /
  Last update: 2019-02-07 10:51    [W:1.656 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site