lkml.org 
[lkml]   [2019]   [Feb]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Subject[PATCH v4 0/1] Thermal throttling for SDM845
    Date
    Only one patch left in this series. This patch depends on [1] and [2] which have been merged through by Rafael through the power tree.

    Changes since v3:
    - first trip point increased to 90 degrees based on Matthias' testing
    - Added Acks

    Changes since v2:
    - Split up the series into auto-register series for cpufreq[1] and
    miscellaneous patches[2][3]. [1] and [2] are needed for this patch to
    work.
    - Merged the two DT patches into one. We end up with 2 passive and 1
    critical trip point.
    - Remove unncessary cooling map for critical trip point, we're shutting down at
    that trip, duh!

    [1] https://lore.kernel.org/lkml/cover.1548084260.git.amit.kucheria@linaro.org/
    [2] https://lore.kernel.org/patchwork/patch/1033953/
    [3] https://lore.kernel.org/patchwork/cover/1033970/

    Amit Kucheria (1):
    arm64: dts: sdm845: wireup the thermal trip points to cpufreq

    arch/arm64/boot/dts/qcom/sdm845.dtsi | 241 ++++++++++++++++++++++++---
    1 file changed, 217 insertions(+), 24 deletions(-)

    --
    2.17.1

    \
     
     \ /
      Last update: 2019-02-06 11:36    [W:2.993 / U:1.828 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site