lkml.org 
[lkml]   [2019]   [Feb]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v6 0/3] Stingray thermal driver support
Hello,

On Mon, Feb 04, 2019 at 04:16:19PM -0800, Ray Jui wrote:
> Hi Zhang/Eduardo,
>
> Can this patch series be merged? It looks like Srinath has addressed all
> review comments?

I will take a look. Side note, thermal patches are reviewed on
linux-pm@vger.kernel.org. Copying that list it does help because that
is how the patches get assigned in patchwork.kernel.org.

>
> The following tag should be added to the binding document patch:
>
> Reviewed-by: Rob Herring <robh@kernel.org>
>
> Thanks,
>
> Ray
>
> On 1/3/2019 12:55 AM, Srinath Mannam wrote:
> > These patches adds the stingray thermal driver and its
> > corresponding DT nodes with documentation.
> >
> > Changes from v5
> > - Addressed Eduardo Valentin comments.
> >
> > Changes from v4
> > - Addressed Rob Herring comments on DT parameters and
> > thermal driver architecture.
> > - Removed brcm,max-crit-temp DT parameter
> > - Changed driver to thermal sensor registration model.
> > - Added trip DT properties.
> >
> > Changes from v3
> > - Addressed Daniel lezcano comments.
> > - Elaborated commit description of thermal driver patch.
> > - Added brcm,max-crit-temp DT parameter.
> >
> > Changes from v2:
> > - All stingray TMON DT nodes are combine together into single.
> > Temperature registers are combined into one mem resource.
> > brcm,tmon-mask parameter has available TMONs mask value.
> > - All available TMONs are initialized together in single
> > instance of driver probe call.
> >
> > Changes from v1:
> > - Fixed auto build sparce warning.
> >
> > Pramod Kumar (3):
> > dt-bindings: thermal: Add binding document for SR thermal
> > thermal: broadcom: Add Stingray thermal driver
> > arm64: dts: stingray: Add Stingray Thermal DT support.
> >
> > .../bindings/thermal/brcm,sr-thermal.txt | 105 ++++++++++++++++++
> > .../arm64/boot/dts/broadcom/stingray/stingray.dtsi | 89 +++++++++++++++
> > drivers/thermal/Kconfig | 3 +-
> > drivers/thermal/broadcom/Kconfig | 9 ++
> > drivers/thermal/broadcom/Makefile | 1 +
> > drivers/thermal/broadcom/sr-thermal.c | 122 +++++++++++++++++++++
> > 6 files changed, 328 insertions(+), 1 deletion(-)
> > create mode 100644 Documentation/devicetree/bindings/thermal/brcm,sr-thermal.txt
> > create mode 100644 drivers/thermal/broadcom/sr-thermal.c
> >

\
 
 \ /
  Last update: 2019-02-06 00:58    [W:0.189 / U:0.228 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site