lkml.org 
[lkml]   [2019]   [Feb]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] Input: add Apple SPI keyboard and trackpad driver.
On Mon, Feb 04, 2019 at 12:19:47AM -0800, Ronald Tschalär wrote:
> The keyboard and trackpad on recent MacBook's (since 8,1) and
> MacBookPro's (13,* and 14,*) are attached to an SPI controller instead
> of USB, as previously. The higher level protocol is not publicly
> documented and hence has been reverse engineered. As a consequence there
> are still a number of unknown fields and commands. However, the known
> parts have been working well and received extensive testing and use.
>
> In order for this driver to work, the proper SPI drivers need to be
> loaded too; for MB8,1 these are spi_pxa2xx_platform and spi_pxa2xx_pci;
> for all others they are spi_pxa2xx_platform and intel_lpss_pci. For this
> reason enabling this driver in the config implies enabling the above
> drivers.

> +config KEYBOARD_APPLESPI
> + tristate "Apple SPI keyboard and trackpad"

> + depends on (X86 && ACPI && SPI) || COMPILE_TEST

COMPILE_TEST more or less makes sense in conjunction with architecture selection.
It means, your code always dependant to ACPI and SPI frameworks.
That's why 0day complained.

> + imply SPI_PXA2XX
> + imply SPI_PXA2XX_PCI
> + imply MFD_INTEL_LPSS_PCI
> + help
> + Say Y here if you are running Linux on any Apple MacBook8,1 or later,
> + or any MacBookPro13,* or MacBookPro14,*.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called applespi.


--
With Best Regards,
Andy Shevchenko


\
 
 \ /
  Last update: 2019-02-05 12:45    [W:0.064 / U:2.068 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site