lkml.org 
[lkml]   [2019]   [Feb]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Subject[PATCH v3 0/5] UFS on APQ8098/MSM8998
    Date
    Hello,

    This series is now good enough for the limelight, IMO.

    Difference between, v2 and v3:
    - Add qcom,msm8998-qmp-ufs-phy compat string and match it in the PHY driver
    - Drop vdd-hba-fixed-regulator
    - Write the reg addresses with full 32-bit width
    - Set regulator-allow-set-load only on the 3 rails used by UFS.
    - Revert the patch introducing ufshcd_set_vccq_rail_unused

    Difference between v1 and v2:
    - New patch to add 'regulator-allow-set-load' prop to all vreg nodes
    - Rename rpmcc node to 'clock-controller' + Add Review tags
    - Drop UFS pinctrl gymnastics (not required, probably left enabled in bootloader)
    - Delete GCC_UFS_ICE_CORE_CLK (ICE not used upstream, I think)
    - Fix sizes of ufsphy register areas based on Jeffrey's feedback
    - Hack ufshcd_set_vccq_rail_unused into a NOP to work around lock up + reboot

    Marc Gonzalez (5):
    arm64: dts: qcom: msm8998: Add UFS nodes
    arm64: dts: qcom: msm8998: Allow drivers to set-load
    dt-bindings: phy-qcom-qmp: Add qcom,msm8998-qmp-ufs-phy
    phy: qcom-qmp: Add QMP UFS PHY support for msm8998
    Revert "scsi: ufs: disable vccq if it's not needed by UFS device"

    .../devicetree/bindings/phy/qcom-qmp-phy.txt | 1 +
    arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi | 22 +++++++
    arch/arm64/boot/dts/qcom/msm8998.dtsi | 63 +++++++++++++++++++
    drivers/phy/qualcomm/phy-qcom-qmp.c | 3 +
    drivers/scsi/ufs/ufs.h | 1 -
    drivers/scsi/ufs/ufshcd.c | 59 ++---------------
    6 files changed, 93 insertions(+), 56 deletions(-)

    --
    2.17.1

    \
     
     \ /
      Last update: 2019-02-04 18:44    [W:2.375 / U:0.004 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site