lkml.org 
[lkml]   [2019]   [Feb]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] selftests/x86/fsgsbase: Indirect output through a wrapper function
Date
In preparation for a change to make this test run repeatedly which
would generate huge amounts of output as is indirect all the printf()
calls in the program through a wrapper and add a quiet flag which can
be used to suppress the output. This is fairly quick and dirty, I'm not
100% sure what would be idiomatic here.

Signed-off-by: Mark Brown <broonie@kernel.org>
---
tools/testing/selftests/x86/fsgsbase.c | 52 ++++++++++++++++----------
1 file changed, 32 insertions(+), 20 deletions(-)

diff --git a/tools/testing/selftests/x86/fsgsbase.c b/tools/testing/selftests/x86/fsgsbase.c
index f249e042b3b5..6cda6daa1f8c 100644
--- a/tools/testing/selftests/x86/fsgsbase.c
+++ b/tools/testing/selftests/x86/fsgsbase.c
@@ -7,6 +7,7 @@
#define _GNU_SOURCE
#include <stdio.h>
#include <stdlib.h>
+#include <stdarg.h>
#include <stdbool.h>
#include <string.h>
#include <sys/syscall.h>
@@ -32,6 +33,17 @@ static volatile sig_atomic_t want_segv;
static volatile unsigned long segv_addr;

static int nerrs;
+static bool quiet;
+
+static void logger(const char *fmt, ...)
+{
+ va_list args;
+
+ va_start(args, fmt);
+ if (!quiet)
+ vprintf(fmt, args);
+ va_end(args);
+}

static void sethandler(int sig, void (*handler)(int, siginfo_t *, void *),
int flags)
@@ -118,29 +130,29 @@ static void check_gs_value(unsigned long value)
unsigned long base;
unsigned short sel;

- printf("[RUN]\tARCH_SET_GS to 0x%lx\n", value);
+ logger("[RUN]\tARCH_SET_GS to 0x%lx\n", value);
if (syscall(SYS_arch_prctl, ARCH_SET_GS, value) != 0)
err(1, "ARCH_SET_GS");

asm volatile ("mov %%gs, %0" : "=rm" (sel));
base = read_base(GS);
if (base == value) {
- printf("[OK]\tGSBASE was set as expected (selector 0x%hx)\n",
+ logger("[OK]\tGSBASE was set as expected (selector 0x%hx)\n",
sel);
} else {
nerrs++;
- printf("[FAIL]\tGSBASE was not as expected: got 0x%lx (selector 0x%hx)\n",
+ logger("[FAIL]\tGSBASE was not as expected: got 0x%lx (selector 0x%hx)\n",
base, sel);
}

if (syscall(SYS_arch_prctl, ARCH_GET_GS, &base) != 0)
err(1, "ARCH_GET_GS");
if (base == value) {
- printf("[OK]\tARCH_GET_GS worked as expected (selector 0x%hx)\n",
+ logger("[OK]\tARCH_GET_GS worked as expected (selector 0x%hx)\n",
sel);
} else {
nerrs++;
- printf("[FAIL]\tARCH_GET_GS was not as expected: got 0x%lx (selector 0x%hx)\n",
+ logger("[FAIL]\tARCH_GET_GS was not as expected: got 0x%lx (selector 0x%hx)\n",
base, sel);
}
}
@@ -149,7 +161,7 @@ static void mov_0_gs(unsigned long initial_base, bool schedule)
{
unsigned long base, arch_base;

- printf("[RUN]\tARCH_SET_GS to 0x%lx then mov 0 to %%gs%s\n", initial_base, schedule ? " and schedule " : "");
+ logger("[RUN]\tARCH_SET_GS to 0x%lx then mov 0 to %%gs%s\n", initial_base, schedule ? " and schedule " : "");
if (syscall(SYS_arch_prctl, ARCH_SET_GS, initial_base) != 0)
err(1, "ARCH_SET_GS");

@@ -161,10 +173,10 @@ static void mov_0_gs(unsigned long initial_base, bool schedule)
if (syscall(SYS_arch_prctl, ARCH_GET_GS, &arch_base) != 0)
err(1, "ARCH_GET_GS");
if (base == arch_base) {
- printf("[OK]\tGSBASE is 0x%lx\n", base);
+ logger("[OK]\tGSBASE is 0x%lx\n", base);
} else {
nerrs++;
- printf("[FAIL]\tGSBASE changed to 0x%lx but kernel reports 0x%lx\n", base, arch_base);
+ logger("[FAIL]\tGSBASE changed to 0x%lx but kernel reports 0x%lx\n", base, arch_base);
}
}

@@ -195,7 +207,7 @@ static void do_remote_base()

unsigned short sel;
asm volatile ("mov %%gs, %0" : "=rm" (sel));
- printf("\tother thread: ARCH_SET_GS(0x%lx)%s -- sel is 0x%hx\n",
+ logger("\tother thread: ARCH_SET_GS(0x%lx)%s -- sel is 0x%hx\n",
to_set, hard_zero ? " and clear gs" : "", sel);
}

@@ -228,7 +240,7 @@ void do_unexpected_base(void)
.useable = 0
};
if (syscall(SYS_modify_ldt, 1, &desc, sizeof(desc)) == 0) {
- printf("\tother thread: using LDT slot 0\n");
+ logger("\tother thread: using LDT slot 0\n");
asm volatile ("mov %0, %%gs" : : "rm" ((unsigned short)0x7));
} else {
/* No modify_ldt for us (configured out, perhaps) */
@@ -250,10 +262,10 @@ void do_unexpected_base(void)
munmap(low_desc, sizeof(desc));

if (ret != 0) {
- printf("[NOTE]\tcould not create a segment -- test won't do anything\n");
+ logger("[NOTE]\tcould not create a segment -- test won't do anything\n");
return;
}
- printf("\tother thread: using GDT slot %d\n", desc.entry_number);
+ logger("\tother thread: using GDT slot %d\n", desc.entry_number);
asm volatile ("mov %0, %%gs" : : "rm" ((unsigned short)((desc.entry_number << 3) | 0x3)));
}

@@ -298,10 +310,10 @@ static void set_gs_and_switch_to(unsigned long local,
local = 0;
}

- printf("[RUN]\tARCH_SET_GS(0x%lx)%s, then schedule to 0x%lx\n",
+ logger("[RUN]\tARCH_SET_GS(0x%lx)%s, then schedule to 0x%lx\n",
local, hard_zero ? " and clear gs" : "", remote);
if (force_sel)
- printf("\tBefore schedule, set selector to 0x%hx\n", force_sel);
+ logger("\tBefore schedule, set selector to 0x%hx\n", force_sel);
if (syscall(SYS_arch_prctl, ARCH_SET_GS, local) != 0)
err(1, "ARCH_SET_GS");
if (hard_zero)
@@ -309,7 +321,7 @@ static void set_gs_and_switch_to(unsigned long local,

if (read_base(GS) != local) {
nerrs++;
- printf("[FAIL]\tGSBASE wasn't set as expected\n");
+ logger("[FAIL]\tGSBASE wasn't set as expected\n");
}

if (force_sel) {
@@ -335,11 +347,11 @@ static void set_gs_and_switch_to(unsigned long local,
asm volatile ("mov %%gs, %0" : "=rm" (sel_post_sched));
base = read_base(GS);
if (base == local && sel_pre_sched == sel_post_sched) {
- printf("[OK]\tGS/BASE remained 0x%hx/0x%lx\n",
+ logger("[OK]\tGS/BASE remained 0x%hx/0x%lx\n",
sel_pre_sched, local);
} else {
nerrs++;
- printf("[FAIL]\tGS/BASE changed from 0x%hx/0x%lx to 0x%hx/0x%lx\n",
+ logger("[FAIL]\tGS/BASE changed from 0x%hx/0x%lx to 0x%hx/0x%lx\n",
sel_pre_sched, local, sel_post_sched, base);
}
}
@@ -348,7 +360,7 @@ static void test_unexpected_base(void)
{
unsigned long base;

- printf("[RUN]\tARCH_SET_GS(0), clear gs, then manipulate GSBASE in a different thread\n");
+ logger("[RUN]\tARCH_SET_GS(0), clear gs, then manipulate GSBASE in a different thread\n");
if (syscall(SYS_arch_prctl, ARCH_SET_GS, 0) != 0)
err(1, "ARCH_SET_GS");
asm volatile ("mov %0, %%gs" : : "rm" ((unsigned short)0));
@@ -360,10 +372,10 @@ static void test_unexpected_base(void)

base = read_base(GS);
if (base == 0) {
- printf("[OK]\tGSBASE remained 0\n");
+ logger("[OK]\tGSBASE remained 0\n");
} else {
nerrs++;
- printf("[FAIL]\tGSBASE changed to 0x%lx\n", base);
+ logger("[FAIL]\tGSBASE changed to 0x%lx\n", base);
}
}

--
2.20.1
\
 
 \ /
  Last update: 2019-02-03 14:41    [W:0.137 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site