lkml.org 
[lkml]   [2019]   [Feb]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] arm64: dts: rockchip: add HDMI sound node for rk3328-rock64
Date
Am Samstag, 2. Februar 2019, 05:34:44 CET schrieb Katsuhiro Suzuki:
> This patch adds HDMI sound (I2S0) node and remove dma properties
> from UART2 node for rock64.
>
> The DMAC of rk3328 can use 8 channels at same time. Currently, total
> 7 channels are used as follows:
> - I2S1 2ch
> - UART2 2ch
> - SPDIF 1ch
> - SPI0 2ch
>
> HDMI audio using I2S0 that requires 2ch but DMAC has only 1 channel.
>
> UART2 can work without DMA resources, so this patch removes dma
> allocation for UART2 and reuses it to I2S0.

I don't follow that description. How can i2s0 re-use the uart2 dma channels?
Looking at the dma table in the TRM, uart2 has channels 6+7 while i2s0
uses channels 11+12. They should just run concurrently?

>
> Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
> ---
> .../arm64/boot/dts/rockchip/rk3328-rock64.dts | 24 ++++++++++++++++++-
> arch/arm64/boot/dts/rockchip/rk3328.dtsi | 1 +
> 2 files changed, 24 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
> index 2157a528276b..e21645aa3fa5 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
> @@ -68,7 +68,8 @@
> sound {
> compatible = "audio-graph-card";
> label = "rockchip,rk3328";
> - dais = <&i2s1_p0
> + dais = <&i2s0_p0
> + &i2s1_p0
> &spdif_p0>;
> };
>
> @@ -141,6 +142,12 @@
>
> &hdmi {
> status = "okay";
> +
> + port@0 {
> + hdmi_p0_0: endpoint {
> + remote-endpoint = <&i2s0_p0_0>;
> + };
> + };
> };
>
> &hdmiphy {
> @@ -256,6 +263,18 @@
> };
> };
>
> +&i2s0 {
> + status = "okay";
> +
> + i2s0_p0: port {
> + i2s0_p0_0: endpoint {
> + dai-format = "i2s";
> + mclk-fs = <256>;
> + remote-endpoint = <&hdmi_p0_0>;
> + };
> + };
> +};
> +
> &i2s1 {
> status = "okay";
>
> @@ -343,6 +362,9 @@
>
> &uart2 {
> status = "okay";
> +
> + /delete-property/ dmas;
> + /delete-property/ dma-names;
> };
>
> &u2phy {
> diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
> index 84f14b132e8f..374b5da93a35 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
> @@ -665,6 +665,7 @@
> pinctrl-names = "default";
> pinctrl-0 = <&hdmi_cec &hdmii2c_xfer &hdmi_hpd>;
> rockchip,grf = <&grf>;
> + #sound-dai-cells = <0>;

please make that a separate patch


Heiko


\
 
 \ /
  Last update: 2019-02-03 10:06    [W:0.130 / U:0.432 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site