lkml.org 
[lkml]   [2019]   [Feb]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/3] mmc: core: Indicate SD specs higher than 4.0
Date
SD specs version 4.x and 5.x have a dedicated slices in the SCR register.
Higher versions will rely on a combination of the existing fields.

Signed-off-by: Avri Altman <avri.altman@wdc.com>
---
drivers/mmc/core/sd.c | 5 +++++
include/linux/mmc/card.h | 2 ++
2 files changed, 7 insertions(+)

diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
index d0d9f90..44f4cbc 100644
--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -209,6 +209,11 @@ static int mmc_decode_scr(struct mmc_card *card)
/* Check if Physical Layer Spec v3.0 is supported */
scr->sda_spec3 = UNSTUFF_BITS(resp, 47, 1);

+ if (scr->sda_spec3) {
+ scr->sda_spec4 = UNSTUFF_BITS(resp, 42, 1);
+ scr->sda_specx = UNSTUFF_BITS(resp, 38, 4);
+ }
+
if (UNSTUFF_BITS(resp, 55, 1))
card->erased_byte = 0xFF;
else
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
index 447648b..919e644 100644
--- a/include/linux/mmc/card.h
+++ b/include/linux/mmc/card.h
@@ -133,6 +133,8 @@ struct mmc_ext_csd {
struct sd_scr {
unsigned char sda_vsn;
unsigned char sda_spec3;
+ unsigned char sda_spec4;
+ unsigned char sda_specx;
unsigned char bus_widths;
#define SD_SCR_BUS_WIDTH_1 (1<<0)
#define SD_SCR_BUS_WIDTH_4 (1<<2)
--
1.9.1
\
 
 \ /
  Last update: 2019-02-03 09:51    [W:0.120 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site