lkml.org 
[lkml]   [2019]   [Feb]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v3] net: e1000e: add MAC address kernel cmd line parameter
Date
> -----Original Message-----
> From: Andrew Lunn <andrew@lunn.ch>
> Sent: giovedì 28 febbraio 2019 16:33
> To: Flavio Suligoi <f.suligoi@asem.it>
> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>; David S . Miller
> <davem@davemloft.net>; intel-wired-lan@lists.osuosl.org;
> netdev@vger.kernel.org; linux-kernel@vger.kernel.org
> Subject: Re: [PATCH v3] net: e1000e: add MAC address kernel cmd line
> parameter
>
> On Thu, Feb 28, 2019 at 02:52:31PM +0100, Flavio Suligoi wrote:
> > Sometimes, in some embedded systems boards (i.e. ARM boards),
> > the NVM eeprom is not mounted, to save cost and space.
> >
> > In this case it is necessary to bypass the NVM management
> > and directly force the MAC address using a kernel command-line
> > parameter (macaddr).
>
> Hi Flavio
>
> Why not use device tree, since this is an ARM platform?

Hi Andrew,

we produce a lot of boards and we have to change the MAC address, from u-boot, for every board.
So I must save in the u-boot environment (SPI NOR flash) the MAC address for every board.

Flavio
>
> Andrew

\
 
 \ /
  Last update: 2019-02-28 16:51    [W:0.052 / U:1.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site