lkml.org 
[lkml]   [2019]   [Feb]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] dt: snps,dw-apb-ssi: Add clock bindings documentation
Date
From: Phil Edworthy <phil.edworthy@renesas.com>

The driver requires a clock property, so detail it in the docs.
Fix a typo, 'pis' to 'pins'.
Add documentation for a separate, optional, interface clock.

Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: Gareth Williams <gareth.williams.jx@renesas.com>
---
Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt
index 2864bc6..7971193 100644
--- a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt
+++ b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt
@@ -8,9 +8,16 @@ Required properties:
- interrupts : One interrupt, used by the controller.
- #address-cells : <1>, as required by generic SPI binding.
- #size-cells : <0>, also as required by generic SPI binding.
+- clocks : phandles for the clocks, see the description of clock-names below.
+ The phandle for the "ssi_clk" clock is required. The phandle for the "pclk"
+ clock is optional. If a single clock is specified but no clock-name, it is
+ the "ssi_clk" clock. If both clocks are listed, the "ssi_clk" must be first.

Optional properties:
-- cs-gpios : Specifies the gpio pis to be used for chipselects.
+- clock-names : Contains the names of the clocks:
+ "ssi_clk", for the core clock used to generate the external SPI clock.
+ "pclk", the interface clock, required for register access.
+- cs-gpios : Specifies the gpio pins to be used for chipselects.
- num-cs : The number of chipselects. If omitted, this will default to 4.
- reg-io-width : The I/O register width (in bytes) implemented by this
device. Supported values are 2 or 4 (the default).
@@ -25,6 +32,7 @@ Example:
interrupts = <0 154 4>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&spi_m_clk>;
num-cs = <2>;
cs-gpios = <&gpio0 13 0>,
<&gpio0 14 0>;
--
2.7.4
\
 
 \ /
  Last update: 2019-02-28 14:27    [W:0.270 / U:0.532 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site