lkml.org 
[lkml]   [2019]   [Feb]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] usb: hub: use non-removable-ports DT property
Date
Mark any ports listed in the non-removable-ports DT property as
hardwired. This is useful for boards with built-in USB devices
that cannot be (or have not been) marked as fixed in hardware.

Signed-off-by: Mans Rullgard <mans@mansr.com>
---
drivers/usb/core/hub.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 3adff4da2ee1..44ac49a30be1 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1328,6 +1328,9 @@ static int hub_configure(struct usb_hub *hub,
unsigned unit_load;
unsigned full_load;
unsigned maxchild;
+ struct property *prop;
+ const __be32 *cur;
+ u32 val;

hub->buffer = kmalloc(sizeof(*hub->buffer), GFP_KERNEL);
if (!hub->buffer) {
@@ -1629,6 +1632,17 @@ static int hub_configure(struct usb_hub *hub,
}
}

+ of_property_for_each_u32(hub_dev->of_node, "non-removable-ports",
+ prop, cur, val) {
+ if (val < 1 || val > hdev->maxchild) {
+ dev_warn(hub_dev, "port number %u out of range\n", val);
+ continue;
+ }
+
+ hub->ports[val - 1]->connect_type =
+ USB_PORT_CONNECT_TYPE_HARD_WIRED;
+ }
+
usb_hub_adjust_deviceremovable(hdev, hub->descriptor);

hub_activate(hub, HUB_INIT);
--
2.20.1
\
 
 \ /
  Last update: 2019-02-28 19:46    [W:0.074 / U:0.960 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site