Messages in this thread | | | Date | Mon, 25 Feb 2019 08:55:01 -0700 | From | Keith Busch <> | Subject | Re: [PATCH] nvme-pci: Prevent mmio reads if pci channel offline |
| |
On Sun, Feb 24, 2019 at 03:27:09PM -0800, Alex_Gagniuc@Dellteam.com wrote: > > More like "fatal error, just panic". It looks like this (from a serial > console): > > [ 57.680494] {1}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 1 > [ 57.680495] {1}[Hardware Error]: event severity: fatal > [ 57.680496] {1}[Hardware Error]: Error 0, type: fatal > [ 57.680496] {1}[Hardware Error]: section_type: PCIe error > [ 57.680497] {1}[Hardware Error]: port_type: 6, downstream switch port > [ 57.680498] {1}[Hardware Error]: version: 3.0 > [ 57.680498] {1}[Hardware Error]: command: 0x0407, status: 0x0010 > [ 57.680499] {1}[Hardware Error]: device_id: 0000:3c:07.0 > [ 57.680499] {1}[Hardware Error]: slot: 1 > [ 57.680500] {1}[Hardware Error]: secondary_bus: 0x40 > [ 57.680500] {1}[Hardware Error]: vendor_id: 0x10b5, device_id: 0x9733 > [ 57.680501] {1}[Hardware Error]: class_code: 000406 > [ 57.680502] {1}[Hardware Error]: bridge: secondary_status: 0x0000, > control: 0x0003
This is a reaction to a ERR_FATAL message, right? What happens if we ignore firmware first and override control of the AER masking with a set to the Unsupported Request Error Mask in the root and downstream ports? You can do a quick test like this for the above's hardware:
# setpci -s 3c:07.0 ECAP_AER+8.l=100000:100000
You'd probably have to do the same command to the root port BDf, and any other switches you have them in the hierarchy.
| |